Graphics.Rendering.Chart.Plot.AreaSpots:renderAreaSpots4D from Chart-1.5.3

Percentage Accurate: 84.7% → 97.4%

Time: 3.0s

Alternatives: 8

Speedup: 1.0×

Specification

Math

\[\begin{array}{l} \\ \frac{x \cdot \left(y - z\right)}{t - z} \end{array} \]

FPCore

(FPCore (x y z t) :precision binary64 (/ (* x (- y z)) (- t z)))

C

double code(double x, double y, double z, double t) {
	return (x * (y - z)) / (t - z);
}

Fortran

module fmin_fmax_functions
    implicit none
    private
    public fmax
    public fmin

    interface fmax
        module procedure fmax88
        module procedure fmax44
        module procedure fmax84
        module procedure fmax48
    end interface
    interface fmin
        module procedure fmin88
        module procedure fmin44
        module procedure fmin84
        module procedure fmin48
    end interface
contains
    real(8) function fmax88(x, y) result (res)
        real(8), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(x, max(x, y), y /= y), x /= x)
    end function
    real(4) function fmax44(x, y) result (res)
        real(4), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(y, merge(x, max(x, y), y /= y), x /= x)
    end function
    real(8) function fmax84(x, y) result(res)
        real(8), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(dble(y), merge(x, max(x, dble(y)), y /= y), x /= x)
    end function
    real(8) function fmax48(x, y) result(res)
        real(4), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(dble(x), max(dble(x), y), y /= y), x /= x)
    end function
    real(8) function fmin88(x, y) result (res)
        real(8), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(x, min(x, y), y /= y), x /= x)
    end function
    real(4) function fmin44(x, y) result (res)
        real(4), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(y, merge(x, min(x, y), y /= y), x /= x)
    end function
    real(8) function fmin84(x, y) result(res)
        real(8), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(dble(y), merge(x, min(x, dble(y)), y /= y), x /= x)
    end function
    real(8) function fmin48(x, y) result(res)
        real(4), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(dble(x), min(dble(x), y), y /= y), x /= x)
    end function
end module

real(8) function code(x, y, z, t)
use fmin_fmax_functions
    real(8), intent (in) :: x
    real(8), intent (in) :: y
    real(8), intent (in) :: z
    real(8), intent (in) :: t
    code = (x * (y - z)) / (t - z)
end function

Java

public static double code(double x, double y, double z, double t) {
	return (x * (y - z)) / (t - z);
}

Python

def code(x, y, z, t):
	return (x * (y - z)) / (t - z)

Julia

function code(x, y, z, t)
	return Float64(Float64(x * Float64(y - z)) / Float64(t - z))
end

MATLAB

function tmp = code(x, y, z, t)
	tmp = (x * (y - z)) / (t - z);
end

Wolfram

code[x_, y_, z_, t_] := N[(N[(x * N[(y - z), $MachinePrecision]), $MachinePrecision] / N[(t - z), $MachinePrecision]), $MachinePrecision]

Initial Program: 84.7% accurate, 1.0× speedup

Math

\[\begin{array}{l} \\ \frac{x \cdot \left(y - z\right)}{t - z} \end{array} \]

FPCore

(FPCore (x y z t) :precision binary64 (/ (* x (- y z)) (- t z)))

C

double code(double x, double y, double z, double t) {
	return (x * (y - z)) / (t - z);
}

Fortran

module fmin_fmax_functions
    implicit none
    private
    public fmax
    public fmin

    interface fmax
        module procedure fmax88
        module procedure fmax44
        module procedure fmax84
        module procedure fmax48
    end interface
    interface fmin
        module procedure fmin88
        module procedure fmin44
        module procedure fmin84
        module procedure fmin48
    end interface
contains
    real(8) function fmax88(x, y) result (res)
        real(8), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(x, max(x, y), y /= y), x /= x)
    end function
    real(4) function fmax44(x, y) result (res)
        real(4), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(y, merge(x, max(x, y), y /= y), x /= x)
    end function
    real(8) function fmax84(x, y) result(res)
        real(8), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(dble(y), merge(x, max(x, dble(y)), y /= y), x /= x)
    end function
    real(8) function fmax48(x, y) result(res)
        real(4), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(dble(x), max(dble(x), y), y /= y), x /= x)
    end function
    real(8) function fmin88(x, y) result (res)
        real(8), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(x, min(x, y), y /= y), x /= x)
    end function
    real(4) function fmin44(x, y) result (res)
        real(4), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(y, merge(x, min(x, y), y /= y), x /= x)
    end function
    real(8) function fmin84(x, y) result(res)
        real(8), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(dble(y), merge(x, min(x, dble(y)), y /= y), x /= x)
    end function
    real(8) function fmin48(x, y) result(res)
        real(4), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(dble(x), min(dble(x), y), y /= y), x /= x)
    end function
end module

real(8) function code(x, y, z, t)
use fmin_fmax_functions
    real(8), intent (in) :: x
    real(8), intent (in) :: y
    real(8), intent (in) :: z
    real(8), intent (in) :: t
    code = (x * (y - z)) / (t - z)
end function

Java

public static double code(double x, double y, double z, double t) {
	return (x * (y - z)) / (t - z);
}

Python

def code(x, y, z, t):
	return (x * (y - z)) / (t - z)

Julia

function code(x, y, z, t)
	return Float64(Float64(x * Float64(y - z)) / Float64(t - z))
end

MATLAB

function tmp = code(x, y, z, t)
	tmp = (x * (y - z)) / (t - z);
end

Wolfram

code[x_, y_, z_, t_] := N[(N[(x * N[(y - z), $MachinePrecision]), $MachinePrecision] / N[(t - z), $MachinePrecision]), $MachinePrecision]

Alternative 1: 97.4% accurate, 1.0× speedup

Math

\[\begin{array}{l} \\ x \cdot \frac{y - z}{t - z} \end{array} \]

FPCore

(FPCore (x y z t) :precision binary64 (* x (/ (- y z) (- t z))))

C

double code(double x, double y, double z, double t) {
	return x * ((y - z) / (t - z));
}

Fortran

module fmin_fmax_functions
    implicit none
    private
    public fmax
    public fmin

    interface fmax
        module procedure fmax88
        module procedure fmax44
        module procedure fmax84
        module procedure fmax48
    end interface
    interface fmin
        module procedure fmin88
        module procedure fmin44
        module procedure fmin84
        module procedure fmin48
    end interface
contains
    real(8) function fmax88(x, y) result (res)
        real(8), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(x, max(x, y), y /= y), x /= x)
    end function
    real(4) function fmax44(x, y) result (res)
        real(4), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(y, merge(x, max(x, y), y /= y), x /= x)
    end function
    real(8) function fmax84(x, y) result(res)
        real(8), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(dble(y), merge(x, max(x, dble(y)), y /= y), x /= x)
    end function
    real(8) function fmax48(x, y) result(res)
        real(4), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(dble(x), max(dble(x), y), y /= y), x /= x)
    end function
    real(8) function fmin88(x, y) result (res)
        real(8), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(x, min(x, y), y /= y), x /= x)
    end function
    real(4) function fmin44(x, y) result (res)
        real(4), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(y, merge(x, min(x, y), y /= y), x /= x)
    end function
    real(8) function fmin84(x, y) result(res)
        real(8), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(dble(y), merge(x, min(x, dble(y)), y /= y), x /= x)
    end function
    real(8) function fmin48(x, y) result(res)
        real(4), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(dble(x), min(dble(x), y), y /= y), x /= x)
    end function
end module

real(8) function code(x, y, z, t)
use fmin_fmax_functions
    real(8), intent (in) :: x
    real(8), intent (in) :: y
    real(8), intent (in) :: z
    real(8), intent (in) :: t
    code = x * ((y - z) / (t - z))
end function

Java

public static double code(double x, double y, double z, double t) {
	return x * ((y - z) / (t - z));
}

Python

def code(x, y, z, t):
	return x * ((y - z) / (t - z))

Julia

function code(x, y, z, t)
	return Float64(x * Float64(Float64(y - z) / Float64(t - z)))
end

MATLAB

function tmp = code(x, y, z, t)
	tmp = x * ((y - z) / (t - z));
end

Wolfram

code[x_, y_, z_, t_] := N[(x * N[(N[(y - z), $MachinePrecision] / N[(t - z), $MachinePrecision]), $MachinePrecision]), $MachinePrecision]

Derivation

1. Initial program 84.7%

   \[\frac{x \cdot \left(y - z\right)}{t - z} \]
2. Add Preprocessing
3. Step-by-step derivation

   1. lift--.f64 N/A

      \[\leadsto \frac{x \cdot \left(y - z\right)}{\color{blue}{t - z}} \]

   2. lift-/.f64 N/A

      \[\leadsto \color{blue}{\frac{x \cdot \left(y - z\right)}{t - z}} \]

   3. lift--.f64 N/A

      \[\leadsto \frac{x \cdot \color{blue}{\left(y - z\right)}}{t - z} \]

   4. lift-*.f64 N/A

      \[\leadsto \frac{\color{blue}{x \cdot \left(y - z\right)}}{t - z} \]

   5. associate-/l* N/A

      \[\leadsto \color{blue}{x \cdot \frac{y - z}{t - z}} \]

   6. lower-*.f64 N/A

      \[\leadsto \color{blue}{x \cdot \frac{y - z}{t - z}} \]

   7. lower-/.f64 N/A

      \[\leadsto x \cdot \color{blue}{\frac{y - z}{t - z}} \]

   8. lift--.f64 N/A

      \[\leadsto x \cdot \frac{\color{blue}{y - z}}{t - z} \]

   9. lift--.f64 97.4

      \[\leadsto x \cdot \frac{y - z}{\color{blue}{t - z}} \]

4. Applied rewrites 97.4%

   \[\leadsto \color{blue}{x \cdot \frac{y - z}{t - z}} \]
5. Add Preprocessing

Alternative 2: 74.0% accurate, 0.5× speedup

Math

\[\begin{array}{l} \\ \begin{array}{l} t_1 := x \cdot \frac{-z}{t - z}\\ \mathbf{if}\;z \leq -7.2 \cdot 10^{+116}:\\ \;\;\;\;t\_1\\ \mathbf{elif}\;z \leq -6 \cdot 10^{+54}:\\ \;\;\;\;x \cdot \frac{y - z}{t}\\ \mathbf{elif}\;z \leq 3.7 \cdot 10^{-31}:\\ \;\;\;\;x \cdot \frac{y}{t - z}\\ \mathbf{elif}\;z \leq 2.5 \cdot 10^{+132}:\\ \;\;\;\;x \cdot \frac{y - z}{-z}\\ \mathbf{else}:\\ \;\;\;\;t\_1\\ \end{array} \end{array} \]

FPCore

(FPCore (x y z t)
 :precision binary64
 (let* ((t_1 (* x (/ (- z) (- t z)))))
   (if (<= z -7.2e+116)
     t_1
     (if (<= z -6e+54)
       (* x (/ (- y z) t))
       (if (<= z 3.7e-31)
         (* x (/ y (- t z)))
         (if (<= z 2.5e+132) (* x (/ (- y z) (- z))) t_1))))))

C

double code(double x, double y, double z, double t) {
	double t_1 = x * (-z / (t - z));
	double tmp;
	if (z <= -7.2e+116) {
		tmp = t_1;
	} else if (z <= -6e+54) {
		tmp = x * ((y - z) / t);
	} else if (z <= 3.7e-31) {
		tmp = x * (y / (t - z));
	} else if (z <= 2.5e+132) {
		tmp = x * ((y - z) / -z);
	} else {
		tmp = t_1;
	}
	return tmp;
}

Fortran

module fmin_fmax_functions
    implicit none
    private
    public fmax
    public fmin

    interface fmax
        module procedure fmax88
        module procedure fmax44
        module procedure fmax84
        module procedure fmax48
    end interface
    interface fmin
        module procedure fmin88
        module procedure fmin44
        module procedure fmin84
        module procedure fmin48
    end interface
contains
    real(8) function fmax88(x, y) result (res)
        real(8), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(x, max(x, y), y /= y), x /= x)
    end function
    real(4) function fmax44(x, y) result (res)
        real(4), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(y, merge(x, max(x, y), y /= y), x /= x)
    end function
    real(8) function fmax84(x, y) result(res)
        real(8), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(dble(y), merge(x, max(x, dble(y)), y /= y), x /= x)
    end function
    real(8) function fmax48(x, y) result(res)
        real(4), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(dble(x), max(dble(x), y), y /= y), x /= x)
    end function
    real(8) function fmin88(x, y) result (res)
        real(8), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(x, min(x, y), y /= y), x /= x)
    end function
    real(4) function fmin44(x, y) result (res)
        real(4), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(y, merge(x, min(x, y), y /= y), x /= x)
    end function
    real(8) function fmin84(x, y) result(res)
        real(8), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(dble(y), merge(x, min(x, dble(y)), y /= y), x /= x)
    end function
    real(8) function fmin48(x, y) result(res)
        real(4), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(dble(x), min(dble(x), y), y /= y), x /= x)
    end function
end module

real(8) function code(x, y, z, t)
use fmin_fmax_functions
    real(8), intent (in) :: x
    real(8), intent (in) :: y
    real(8), intent (in) :: z
    real(8), intent (in) :: t
    real(8) :: t_1
    real(8) :: tmp
    t_1 = x * (-z / (t - z))
    if (z <= (-7.2d+116)) then
        tmp = t_1
    else if (z <= (-6d+54)) then
        tmp = x * ((y - z) / t)
    else if (z <= 3.7d-31) then
        tmp = x * (y / (t - z))
    else if (z <= 2.5d+132) then
        tmp = x * ((y - z) / -z)
    else
        tmp = t_1
    end if
    code = tmp
end function

Java

public static double code(double x, double y, double z, double t) {
	double t_1 = x * (-z / (t - z));
	double tmp;
	if (z <= -7.2e+116) {
		tmp = t_1;
	} else if (z <= -6e+54) {
		tmp = x * ((y - z) / t);
	} else if (z <= 3.7e-31) {
		tmp = x * (y / (t - z));
	} else if (z <= 2.5e+132) {
		tmp = x * ((y - z) / -z);
	} else {
		tmp = t_1;
	}
	return tmp;
}

Python

def code(x, y, z, t):
	t_1 = x * (-z / (t - z))
	tmp = 0
	if z <= -7.2e+116:
		tmp = t_1
	elif z <= -6e+54:
		tmp = x * ((y - z) / t)
	elif z <= 3.7e-31:
		tmp = x * (y / (t - z))
	elif z <= 2.5e+132:
		tmp = x * ((y - z) / -z)
	else:
		tmp = t_1
	return tmp

Julia

function code(x, y, z, t)
	t_1 = Float64(x * Float64(Float64(-z) / Float64(t - z)))
	tmp = 0.0
	if (z <= -7.2e+116)
		tmp = t_1;
	elseif (z <= -6e+54)
		tmp = Float64(x * Float64(Float64(y - z) / t));
	elseif (z <= 3.7e-31)
		tmp = Float64(x * Float64(y / Float64(t - z)));
	elseif (z <= 2.5e+132)
		tmp = Float64(x * Float64(Float64(y - z) / Float64(-z)));
	else
		tmp = t_1;
	end
	return tmp
end

MATLAB

function tmp_2 = code(x, y, z, t)
	t_1 = x * (-z / (t - z));
	tmp = 0.0;
	if (z <= -7.2e+116)
		tmp = t_1;
	elseif (z <= -6e+54)
		tmp = x * ((y - z) / t);
	elseif (z <= 3.7e-31)
		tmp = x * (y / (t - z));
	elseif (z <= 2.5e+132)
		tmp = x * ((y - z) / -z);
	else
		tmp = t_1;
	end
	tmp_2 = tmp;
end

Wolfram

code[x_, y_, z_, t_] := Block[{t$95$1 = N[(x * N[((-z) / N[(t - z), $MachinePrecision]), $MachinePrecision]), $MachinePrecision]}, If[LessEqual[z, -7.2e+116], t$95$1, If[LessEqual[z, -6e+54], N[(x * N[(N[(y - z), $MachinePrecision] / t), $MachinePrecision]), $MachinePrecision], If[LessEqual[z, 3.7e-31], N[(x * N[(y / N[(t - z), $MachinePrecision]), $MachinePrecision]), $MachinePrecision], If[LessEqual[z, 2.5e+132], N[(x * N[(N[(y - z), $MachinePrecision] / (-z)), $MachinePrecision]), $MachinePrecision], t$95$1]]]]]

Derivation

1. Split input into 4 regimes

2. if z < -7.19999999999999941e116 or 2.5000000000000001e132 < z

   1. Initial program 67.8%

      \[\frac{x \cdot \left(y - z\right)}{t - z} \]
   2. Add Preprocessing
   3. Step-by-step derivation

      1. lift--.f64 N/A

         \[\leadsto \frac{x \cdot \left(y - z\right)}{\color{blue}{t - z}} \]

      2. lift-/.f64 N/A

         \[\leadsto \color{blue}{\frac{x \cdot \left(y - z\right)}{t - z}} \]

      3. lift--.f64 N/A

         \[\leadsto \frac{x \cdot \color{blue}{\left(y - z\right)}}{t - z} \]

      4. lift-*.f64 N/A

         \[\leadsto \frac{\color{blue}{x \cdot \left(y - z\right)}}{t - z} \]

      5. associate-/l* N/A

         \[\leadsto \color{blue}{x \cdot \frac{y - z}{t - z}} \]

      6. lower-*.f64 N/A

         \[\leadsto \color{blue}{x \cdot \frac{y - z}{t - z}} \]

      7. lower-/.f64 N/A

         \[\leadsto x \cdot \color{blue}{\frac{y - z}{t - z}} \]

      8. lift--.f64 N/A

         \[\leadsto x \cdot \frac{\color{blue}{y - z}}{t - z} \]

      9. lift--.f64 99.9

         \[\leadsto x \cdot \frac{y - z}{\color{blue}{t - z}} \]

   4. Applied rewrites 99.9%

      \[\leadsto \color{blue}{x \cdot \frac{y - z}{t - z}} \]

   5. Taylor expanded in y around 0

      \[\leadsto x \cdot \frac{\color{blue}{-1 \cdot z}}{t - z} \]
   6. Step-by-step derivation

      1. mul-1-neg N/A

         \[\leadsto x \cdot \frac{\mathsf{neg}\left(z\right)}{t - z} \]

      2. lift-neg.f64 84.6

         \[\leadsto x \cdot \frac{-z}{t - z} \]

   7. Applied rewrites 84.6%

      \[\leadsto x \cdot \frac{\color{blue}{-z}}{t - z} \]

   if -7.19999999999999941e116 < z < -5.9999999999999998e54

   1. Initial program 87.0%

      \[\frac{x \cdot \left(y - z\right)}{t - z} \]
   2. Add Preprocessing
   3. Step-by-step derivation

      1. lift--.f64 N/A

         \[\leadsto \frac{x \cdot \left(y - z\right)}{\color{blue}{t - z}} \]

      2. lift-/.f64 N/A

         \[\leadsto \color{blue}{\frac{x \cdot \left(y - z\right)}{t - z}} \]

      3. lift--.f64 N/A

         \[\leadsto \frac{x \cdot \color{blue}{\left(y - z\right)}}{t - z} \]

      4. lift-*.f64 N/A

         \[\leadsto \frac{\color{blue}{x \cdot \left(y - z\right)}}{t - z} \]

      5. associate-/l* N/A

         \[\leadsto \color{blue}{x \cdot \frac{y - z}{t - z}} \]

      6. lower-*.f64 N/A

         \[\leadsto \color{blue}{x \cdot \frac{y - z}{t - z}} \]

      7. lower-/.f64 N/A

         \[\leadsto x \cdot \color{blue}{\frac{y - z}{t - z}} \]

      8. lift--.f64 N/A

         \[\leadsto x \cdot \frac{\color{blue}{y - z}}{t - z} \]

      9. lift--.f64 99.8

         \[\leadsto x \cdot \frac{y - z}{\color{blue}{t - z}} \]

   4. Applied rewrites 99.8%

      \[\leadsto \color{blue}{x \cdot \frac{y - z}{t - z}} \]

   5. Taylor expanded in z around 0

      \[\leadsto x \cdot \frac{y - z}{\color{blue}{t}} \]
   6. Step-by-step derivation

   7. Applied rewrites 39.1%

      \[\leadsto x \cdot \frac{y - z}{\color{blue}{t}} \]

   if -5.9999999999999998e54 < z < 3.6999999999999998e-31

   1. Initial program 93.5%

      \[\frac{x \cdot \left(y - z\right)}{t - z} \]
   2. Add Preprocessing

   3. Taylor expanded in y around inf

      \[\leadsto \color{blue}{\frac{x \cdot y}{t - z}} \]
   4. Step-by-step derivation

      1. associate-/l* N/A

         \[\leadsto x \cdot \color{blue}{\frac{y}{t - z}} \]

      2. lower-*.f64 N/A

         \[\leadsto x \cdot \color{blue}{\frac{y}{t - z}} \]

      3. lower-/.f64 N/A

         \[\leadsto x \cdot \frac{y}{\color{blue}{t - z}} \]

      4. lift--.f64 74.7

         \[\leadsto x \cdot \frac{y}{t - \color{blue}{z}} \]

   5. Applied rewrites 74.7%

      \[\leadsto \color{blue}{x \cdot \frac{y}{t - z}} \]

   if 3.6999999999999998e-31 < z < 2.5000000000000001e132

   1. Initial program 88.4%

      \[\frac{x \cdot \left(y - z\right)}{t - z} \]
   2. Add Preprocessing

   3. Taylor expanded in z around inf

      \[\leadsto \frac{x \cdot \left(y - z\right)}{\color{blue}{-1 \cdot z}} \]
   4. Step-by-step derivation

      1. mul-1-neg N/A

         \[\leadsto \frac{x \cdot \left(y - z\right)}{\mathsf{neg}\left(z\right)} \]

      2. lower-neg.f64 55.1

         \[\leadsto \frac{x \cdot \left(y - z\right)}{-z} \]

   5. Applied rewrites 55.1%

      \[\leadsto \frac{x \cdot \left(y - z\right)}{\color{blue}{-z}} \]
   6. Step-by-step derivation

      1. lift-/.f64 N/A

         \[\leadsto \color{blue}{\frac{x \cdot \left(y - z\right)}{-z}} \]

      2. lift--.f64 N/A

         \[\leadsto \frac{x \cdot \color{blue}{\left(y - z\right)}}{-z} \]

      3. lift-*.f64 N/A

         \[\leadsto \frac{\color{blue}{x \cdot \left(y - z\right)}}{-z} \]

      4. associate-/l* N/A

         \[\leadsto \color{blue}{x \cdot \frac{y - z}{-z}} \]

      5. lower-*.f64 N/A

         \[\leadsto \color{blue}{x \cdot \frac{y - z}{-z}} \]

      6. lower-/.f64 N/A

         \[\leadsto x \cdot \color{blue}{\frac{y - z}{-z}} \]

      7. lift--.f64 60.2

         \[\leadsto x \cdot \frac{\color{blue}{y - z}}{-z} \]

   7. Applied rewrites 60.2%

      \[\leadsto \color{blue}{x \cdot \frac{y - z}{-z}} \]
3. Recombined 4 regimes into one program.
4. Add Preprocessing

Alternative 3: 73.9% accurate, 0.6× speedup

Math

\[\begin{array}{l} \\ \begin{array}{l} t_1 := x \cdot \frac{-z}{t - z}\\ \mathbf{if}\;z \leq -7.2 \cdot 10^{+116}:\\ \;\;\;\;t\_1\\ \mathbf{elif}\;z \leq -6 \cdot 10^{+54}:\\ \;\;\;\;x \cdot \frac{y - z}{t}\\ \mathbf{elif}\;z \leq 2.9 \cdot 10^{-31}:\\ \;\;\;\;x \cdot \frac{y}{t - z}\\ \mathbf{else}:\\ \;\;\;\;t\_1\\ \end{array} \end{array} \]

FPCore

(FPCore (x y z t)
 :precision binary64
 (let* ((t_1 (* x (/ (- z) (- t z)))))
   (if (<= z -7.2e+116)
     t_1
     (if (<= z -6e+54)
       (* x (/ (- y z) t))
       (if (<= z 2.9e-31) (* x (/ y (- t z))) t_1)))))

C

double code(double x, double y, double z, double t) {
	double t_1 = x * (-z / (t - z));
	double tmp;
	if (z <= -7.2e+116) {
		tmp = t_1;
	} else if (z <= -6e+54) {
		tmp = x * ((y - z) / t);
	} else if (z <= 2.9e-31) {
		tmp = x * (y / (t - z));
	} else {
		tmp = t_1;
	}
	return tmp;
}

Fortran

module fmin_fmax_functions
    implicit none
    private
    public fmax
    public fmin

    interface fmax
        module procedure fmax88
        module procedure fmax44
        module procedure fmax84
        module procedure fmax48
    end interface
    interface fmin
        module procedure fmin88
        module procedure fmin44
        module procedure fmin84
        module procedure fmin48
    end interface
contains
    real(8) function fmax88(x, y) result (res)
        real(8), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(x, max(x, y), y /= y), x /= x)
    end function
    real(4) function fmax44(x, y) result (res)
        real(4), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(y, merge(x, max(x, y), y /= y), x /= x)
    end function
    real(8) function fmax84(x, y) result(res)
        real(8), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(dble(y), merge(x, max(x, dble(y)), y /= y), x /= x)
    end function
    real(8) function fmax48(x, y) result(res)
        real(4), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(dble(x), max(dble(x), y), y /= y), x /= x)
    end function
    real(8) function fmin88(x, y) result (res)
        real(8), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(x, min(x, y), y /= y), x /= x)
    end function
    real(4) function fmin44(x, y) result (res)
        real(4), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(y, merge(x, min(x, y), y /= y), x /= x)
    end function
    real(8) function fmin84(x, y) result(res)
        real(8), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(dble(y), merge(x, min(x, dble(y)), y /= y), x /= x)
    end function
    real(8) function fmin48(x, y) result(res)
        real(4), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(dble(x), min(dble(x), y), y /= y), x /= x)
    end function
end module

real(8) function code(x, y, z, t)
use fmin_fmax_functions
    real(8), intent (in) :: x
    real(8), intent (in) :: y
    real(8), intent (in) :: z
    real(8), intent (in) :: t
    real(8) :: t_1
    real(8) :: tmp
    t_1 = x * (-z / (t - z))
    if (z <= (-7.2d+116)) then
        tmp = t_1
    else if (z <= (-6d+54)) then
        tmp = x * ((y - z) / t)
    else if (z <= 2.9d-31) then
        tmp = x * (y / (t - z))
    else
        tmp = t_1
    end if
    code = tmp
end function

Java

public static double code(double x, double y, double z, double t) {
	double t_1 = x * (-z / (t - z));
	double tmp;
	if (z <= -7.2e+116) {
		tmp = t_1;
	} else if (z <= -6e+54) {
		tmp = x * ((y - z) / t);
	} else if (z <= 2.9e-31) {
		tmp = x * (y / (t - z));
	} else {
		tmp = t_1;
	}
	return tmp;
}

Python

def code(x, y, z, t):
	t_1 = x * (-z / (t - z))
	tmp = 0
	if z <= -7.2e+116:
		tmp = t_1
	elif z <= -6e+54:
		tmp = x * ((y - z) / t)
	elif z <= 2.9e-31:
		tmp = x * (y / (t - z))
	else:
		tmp = t_1
	return tmp

Julia

function code(x, y, z, t)
	t_1 = Float64(x * Float64(Float64(-z) / Float64(t - z)))
	tmp = 0.0
	if (z <= -7.2e+116)
		tmp = t_1;
	elseif (z <= -6e+54)
		tmp = Float64(x * Float64(Float64(y - z) / t));
	elseif (z <= 2.9e-31)
		tmp = Float64(x * Float64(y / Float64(t - z)));
	else
		tmp = t_1;
	end
	return tmp
end

MATLAB

function tmp_2 = code(x, y, z, t)
	t_1 = x * (-z / (t - z));
	tmp = 0.0;
	if (z <= -7.2e+116)
		tmp = t_1;
	elseif (z <= -6e+54)
		tmp = x * ((y - z) / t);
	elseif (z <= 2.9e-31)
		tmp = x * (y / (t - z));
	else
		tmp = t_1;
	end
	tmp_2 = tmp;
end

Wolfram

code[x_, y_, z_, t_] := Block[{t$95$1 = N[(x * N[((-z) / N[(t - z), $MachinePrecision]), $MachinePrecision]), $MachinePrecision]}, If[LessEqual[z, -7.2e+116], t$95$1, If[LessEqual[z, -6e+54], N[(x * N[(N[(y - z), $MachinePrecision] / t), $MachinePrecision]), $MachinePrecision], If[LessEqual[z, 2.9e-31], N[(x * N[(y / N[(t - z), $MachinePrecision]), $MachinePrecision]), $MachinePrecision], t$95$1]]]]

Derivation

1. Split input into 3 regimes

2. if z < -7.19999999999999941e116 or 2.9000000000000001e-31 < z

   1. Initial program 74.1%

      \[\frac{x \cdot \left(y - z\right)}{t - z} \]
   2. Add Preprocessing
   3. Step-by-step derivation

      1. lift--.f64 N/A

         \[\leadsto \frac{x \cdot \left(y - z\right)}{\color{blue}{t - z}} \]

      2. lift-/.f64 N/A

         \[\leadsto \color{blue}{\frac{x \cdot \left(y - z\right)}{t - z}} \]

      3. lift--.f64 N/A

         \[\leadsto \frac{x \cdot \color{blue}{\left(y - z\right)}}{t - z} \]

      4. lift-*.f64 N/A

         \[\leadsto \frac{\color{blue}{x \cdot \left(y - z\right)}}{t - z} \]

      5. associate-/l* N/A

         \[\leadsto \color{blue}{x \cdot \frac{y - z}{t - z}} \]

      6. lower-*.f64 N/A

         \[\leadsto \color{blue}{x \cdot \frac{y - z}{t - z}} \]

      7. lower-/.f64 N/A

         \[\leadsto x \cdot \color{blue}{\frac{y - z}{t - z}} \]

      8. lift--.f64 N/A

         \[\leadsto x \cdot \frac{\color{blue}{y - z}}{t - z} \]

      9. lift--.f64 99.8

         \[\leadsto x \cdot \frac{y - z}{\color{blue}{t - z}} \]

   4. Applied rewrites 99.8%

      \[\leadsto \color{blue}{x \cdot \frac{y - z}{t - z}} \]

   5. Taylor expanded in y around 0

      \[\leadsto x \cdot \frac{\color{blue}{-1 \cdot z}}{t - z} \]
   6. Step-by-step derivation

      1. mul-1-neg N/A

         \[\leadsto x \cdot \frac{\mathsf{neg}\left(z\right)}{t - z} \]

      2. lift-neg.f64 76.8

         \[\leadsto x \cdot \frac{-z}{t - z} \]

   7. Applied rewrites 76.8%

      \[\leadsto x \cdot \frac{\color{blue}{-z}}{t - z} \]

   if -7.19999999999999941e116 < z < -5.9999999999999998e54

   1. Initial program 87.0%

      \[\frac{x \cdot \left(y - z\right)}{t - z} \]
   2. Add Preprocessing
   3. Step-by-step derivation

      1. lift--.f64 N/A

         \[\leadsto \frac{x \cdot \left(y - z\right)}{\color{blue}{t - z}} \]

      2. lift-/.f64 N/A

         \[\leadsto \color{blue}{\frac{x \cdot \left(y - z\right)}{t - z}} \]

      3. lift--.f64 N/A

         \[\leadsto \frac{x \cdot \color{blue}{\left(y - z\right)}}{t - z} \]

      4. lift-*.f64 N/A

         \[\leadsto \frac{\color{blue}{x \cdot \left(y - z\right)}}{t - z} \]

      5. associate-/l* N/A

         \[\leadsto \color{blue}{x \cdot \frac{y - z}{t - z}} \]

      6. lower-*.f64 N/A

         \[\leadsto \color{blue}{x \cdot \frac{y - z}{t - z}} \]

      7. lower-/.f64 N/A

         \[\leadsto x \cdot \color{blue}{\frac{y - z}{t - z}} \]

      8. lift--.f64 N/A

         \[\leadsto x \cdot \frac{\color{blue}{y - z}}{t - z} \]

      9. lift--.f64 99.8

         \[\leadsto x \cdot \frac{y - z}{\color{blue}{t - z}} \]

   4. Applied rewrites 99.8%

      \[\leadsto \color{blue}{x \cdot \frac{y - z}{t - z}} \]

   5. Taylor expanded in z around 0

      \[\leadsto x \cdot \frac{y - z}{\color{blue}{t}} \]
   6. Step-by-step derivation

   7. Applied rewrites 39.1%

      \[\leadsto x \cdot \frac{y - z}{\color{blue}{t}} \]

   if -5.9999999999999998e54 < z < 2.9000000000000001e-31

   1. Initial program 93.5%

      \[\frac{x \cdot \left(y - z\right)}{t - z} \]
   2. Add Preprocessing

   3. Taylor expanded in y around inf

      \[\leadsto \color{blue}{\frac{x \cdot y}{t - z}} \]
   4. Step-by-step derivation

      1. associate-/l* N/A

         \[\leadsto x \cdot \color{blue}{\frac{y}{t - z}} \]

      2. lower-*.f64 N/A

         \[\leadsto x \cdot \color{blue}{\frac{y}{t - z}} \]

      3. lower-/.f64 N/A

         \[\leadsto x \cdot \frac{y}{\color{blue}{t - z}} \]

      4. lift--.f64 74.7

         \[\leadsto x \cdot \frac{y}{t - \color{blue}{z}} \]

   5. Applied rewrites 74.7%

      \[\leadsto \color{blue}{x \cdot \frac{y}{t - z}} \]
3. Recombined 3 regimes into one program.
4. Add Preprocessing

Alternative 4: 67.8% accurate, 0.6× speedup

Math

\[\begin{array}{l} \\ \begin{array}{l} \mathbf{if}\;z \leq -9.5 \cdot 10^{+168}:\\ \;\;\;\;x\\ \mathbf{elif}\;z \leq -6 \cdot 10^{+54}:\\ \;\;\;\;x \cdot \frac{y - z}{t}\\ \mathbf{elif}\;z \leq 2.8 \cdot 10^{+132}:\\ \;\;\;\;x \cdot \frac{y}{t - z}\\ \mathbf{else}:\\ \;\;\;\;x\\ \end{array} \end{array} \]

FPCore

(FPCore (x y z t)
 :precision binary64
 (if (<= z -9.5e+168)
   x
   (if (<= z -6e+54)
     (* x (/ (- y z) t))
     (if (<= z 2.8e+132) (* x (/ y (- t z))) x))))

C

double code(double x, double y, double z, double t) {
	double tmp;
	if (z <= -9.5e+168) {
		tmp = x;
	} else if (z <= -6e+54) {
		tmp = x * ((y - z) / t);
	} else if (z <= 2.8e+132) {
		tmp = x * (y / (t - z));
	} else {
		tmp = x;
	}
	return tmp;
}

Fortran

module fmin_fmax_functions
    implicit none
    private
    public fmax
    public fmin

    interface fmax
        module procedure fmax88
        module procedure fmax44
        module procedure fmax84
        module procedure fmax48
    end interface
    interface fmin
        module procedure fmin88
        module procedure fmin44
        module procedure fmin84
        module procedure fmin48
    end interface
contains
    real(8) function fmax88(x, y) result (res)
        real(8), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(x, max(x, y), y /= y), x /= x)
    end function
    real(4) function fmax44(x, y) result (res)
        real(4), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(y, merge(x, max(x, y), y /= y), x /= x)
    end function
    real(8) function fmax84(x, y) result(res)
        real(8), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(dble(y), merge(x, max(x, dble(y)), y /= y), x /= x)
    end function
    real(8) function fmax48(x, y) result(res)
        real(4), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(dble(x), max(dble(x), y), y /= y), x /= x)
    end function
    real(8) function fmin88(x, y) result (res)
        real(8), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(x, min(x, y), y /= y), x /= x)
    end function
    real(4) function fmin44(x, y) result (res)
        real(4), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(y, merge(x, min(x, y), y /= y), x /= x)
    end function
    real(8) function fmin84(x, y) result(res)
        real(8), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(dble(y), merge(x, min(x, dble(y)), y /= y), x /= x)
    end function
    real(8) function fmin48(x, y) result(res)
        real(4), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(dble(x), min(dble(x), y), y /= y), x /= x)
    end function
end module

real(8) function code(x, y, z, t)
use fmin_fmax_functions
    real(8), intent (in) :: x
    real(8), intent (in) :: y
    real(8), intent (in) :: z
    real(8), intent (in) :: t
    real(8) :: tmp
    if (z <= (-9.5d+168)) then
        tmp = x
    else if (z <= (-6d+54)) then
        tmp = x * ((y - z) / t)
    else if (z <= 2.8d+132) then
        tmp = x * (y / (t - z))
    else
        tmp = x
    end if
    code = tmp
end function

Java

public static double code(double x, double y, double z, double t) {
	double tmp;
	if (z <= -9.5e+168) {
		tmp = x;
	} else if (z <= -6e+54) {
		tmp = x * ((y - z) / t);
	} else if (z <= 2.8e+132) {
		tmp = x * (y / (t - z));
	} else {
		tmp = x;
	}
	return tmp;
}

Python

def code(x, y, z, t):
	tmp = 0
	if z <= -9.5e+168:
		tmp = x
	elif z <= -6e+54:
		tmp = x * ((y - z) / t)
	elif z <= 2.8e+132:
		tmp = x * (y / (t - z))
	else:
		tmp = x
	return tmp

Julia

function code(x, y, z, t)
	tmp = 0.0
	if (z <= -9.5e+168)
		tmp = x;
	elseif (z <= -6e+54)
		tmp = Float64(x * Float64(Float64(y - z) / t));
	elseif (z <= 2.8e+132)
		tmp = Float64(x * Float64(y / Float64(t - z)));
	else
		tmp = x;
	end
	return tmp
end

MATLAB

function tmp_2 = code(x, y, z, t)
	tmp = 0.0;
	if (z <= -9.5e+168)
		tmp = x;
	elseif (z <= -6e+54)
		tmp = x * ((y - z) / t);
	elseif (z <= 2.8e+132)
		tmp = x * (y / (t - z));
	else
		tmp = x;
	end
	tmp_2 = tmp;
end

Wolfram

code[x_, y_, z_, t_] := If[LessEqual[z, -9.5e+168], x, If[LessEqual[z, -6e+54], N[(x * N[(N[(y - z), $MachinePrecision] / t), $MachinePrecision]), $MachinePrecision], If[LessEqual[z, 2.8e+132], N[(x * N[(y / N[(t - z), $MachinePrecision]), $MachinePrecision]), $MachinePrecision], x]]]

Derivation

1. Split input into 3 regimes

2. if z < -9.49999999999999979e168 or 2.7999999999999999e132 < z

   1. Initial program 66.1%

      \[\frac{x \cdot \left(y - z\right)}{t - z} \]
   2. Add Preprocessing

   3. Taylor expanded in z around inf

      \[\leadsto \color{blue}{x} \]
   4. Step-by-step derivation

   5. Applied rewrites 75.7%

      \[\leadsto \color{blue}{x} \]

   if -9.49999999999999979e168 < z < -5.9999999999999998e54

   1. Initial program 82.5%

      \[\frac{x \cdot \left(y - z\right)}{t - z} \]
   2. Add Preprocessing
   3. Step-by-step derivation

      1. lift--.f64 N/A

         \[\leadsto \frac{x \cdot \left(y - z\right)}{\color{blue}{t - z}} \]

      2. lift-/.f64 N/A

         \[\leadsto \color{blue}{\frac{x \cdot \left(y - z\right)}{t - z}} \]

      3. lift--.f64 N/A

         \[\leadsto \frac{x \cdot \color{blue}{\left(y - z\right)}}{t - z} \]

      4. lift-*.f64 N/A

         \[\leadsto \frac{\color{blue}{x \cdot \left(y - z\right)}}{t - z} \]

      5. associate-/l* N/A

         \[\leadsto \color{blue}{x \cdot \frac{y - z}{t - z}} \]

      6. lower-*.f64 N/A

         \[\leadsto \color{blue}{x \cdot \frac{y - z}{t - z}} \]

      7. lower-/.f64 N/A

         \[\leadsto x \cdot \color{blue}{\frac{y - z}{t - z}} \]

      8. lift--.f64 N/A

         \[\leadsto x \cdot \frac{\color{blue}{y - z}}{t - z} \]

      9. lift--.f64 99.8

         \[\leadsto x \cdot \frac{y - z}{\color{blue}{t - z}} \]

   4. Applied rewrites 99.8%

      \[\leadsto \color{blue}{x \cdot \frac{y - z}{t - z}} \]

   5. Taylor expanded in z around 0

      \[\leadsto x \cdot \frac{y - z}{\color{blue}{t}} \]
   6. Step-by-step derivation

   7. Applied rewrites 35.2%

      \[\leadsto x \cdot \frac{y - z}{\color{blue}{t}} \]

   if -5.9999999999999998e54 < z < 2.7999999999999999e132

   1. Initial program 92.4%

      \[\frac{x \cdot \left(y - z\right)}{t - z} \]
   2. Add Preprocessing

   3. Taylor expanded in y around inf

      \[\leadsto \color{blue}{\frac{x \cdot y}{t - z}} \]
   4. Step-by-step derivation

      1. associate-/l* N/A

         \[\leadsto x \cdot \color{blue}{\frac{y}{t - z}} \]

      2. lower-*.f64 N/A

         \[\leadsto x \cdot \color{blue}{\frac{y}{t - z}} \]

      3. lower-/.f64 N/A

         \[\leadsto x \cdot \frac{y}{\color{blue}{t - z}} \]

      4. lift--.f64 69.1

         \[\leadsto x \cdot \frac{y}{t - \color{blue}{z}} \]

   5. Applied rewrites 69.1%

      \[\leadsto \color{blue}{x \cdot \frac{y}{t - z}} \]
3. Recombined 3 regimes into one program.
4. Add Preprocessing

Alternative 5: 68.6% accurate, 0.7× speedup

Math

\[\begin{array}{l} \\ \begin{array}{l} \mathbf{if}\;z \leq -8.6 \cdot 10^{+116}:\\ \;\;\;\;x\\ \mathbf{elif}\;z \leq 2.8 \cdot 10^{+132}:\\ \;\;\;\;x \cdot \frac{y}{t - z}\\ \mathbf{else}:\\ \;\;\;\;x\\ \end{array} \end{array} \]

FPCore

(FPCore (x y z t)
 :precision binary64
 (if (<= z -8.6e+116) x (if (<= z 2.8e+132) (* x (/ y (- t z))) x)))

C

double code(double x, double y, double z, double t) {
	double tmp;
	if (z <= -8.6e+116) {
		tmp = x;
	} else if (z <= 2.8e+132) {
		tmp = x * (y / (t - z));
	} else {
		tmp = x;
	}
	return tmp;
}

Fortran

module fmin_fmax_functions
    implicit none
    private
    public fmax
    public fmin

    interface fmax
        module procedure fmax88
        module procedure fmax44
        module procedure fmax84
        module procedure fmax48
    end interface
    interface fmin
        module procedure fmin88
        module procedure fmin44
        module procedure fmin84
        module procedure fmin48
    end interface
contains
    real(8) function fmax88(x, y) result (res)
        real(8), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(x, max(x, y), y /= y), x /= x)
    end function
    real(4) function fmax44(x, y) result (res)
        real(4), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(y, merge(x, max(x, y), y /= y), x /= x)
    end function
    real(8) function fmax84(x, y) result(res)
        real(8), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(dble(y), merge(x, max(x, dble(y)), y /= y), x /= x)
    end function
    real(8) function fmax48(x, y) result(res)
        real(4), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(dble(x), max(dble(x), y), y /= y), x /= x)
    end function
    real(8) function fmin88(x, y) result (res)
        real(8), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(x, min(x, y), y /= y), x /= x)
    end function
    real(4) function fmin44(x, y) result (res)
        real(4), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(y, merge(x, min(x, y), y /= y), x /= x)
    end function
    real(8) function fmin84(x, y) result(res)
        real(8), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(dble(y), merge(x, min(x, dble(y)), y /= y), x /= x)
    end function
    real(8) function fmin48(x, y) result(res)
        real(4), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(dble(x), min(dble(x), y), y /= y), x /= x)
    end function
end module

real(8) function code(x, y, z, t)
use fmin_fmax_functions
    real(8), intent (in) :: x
    real(8), intent (in) :: y
    real(8), intent (in) :: z
    real(8), intent (in) :: t
    real(8) :: tmp
    if (z <= (-8.6d+116)) then
        tmp = x
    else if (z <= 2.8d+132) then
        tmp = x * (y / (t - z))
    else
        tmp = x
    end if
    code = tmp
end function

Java

public static double code(double x, double y, double z, double t) {
	double tmp;
	if (z <= -8.6e+116) {
		tmp = x;
	} else if (z <= 2.8e+132) {
		tmp = x * (y / (t - z));
	} else {
		tmp = x;
	}
	return tmp;
}

Python

def code(x, y, z, t):
	tmp = 0
	if z <= -8.6e+116:
		tmp = x
	elif z <= 2.8e+132:
		tmp = x * (y / (t - z))
	else:
		tmp = x
	return tmp

Julia

function code(x, y, z, t)
	tmp = 0.0
	if (z <= -8.6e+116)
		tmp = x;
	elseif (z <= 2.8e+132)
		tmp = Float64(x * Float64(y / Float64(t - z)));
	else
		tmp = x;
	end
	return tmp
end

MATLAB

function tmp_2 = code(x, y, z, t)
	tmp = 0.0;
	if (z <= -8.6e+116)
		tmp = x;
	elseif (z <= 2.8e+132)
		tmp = x * (y / (t - z));
	else
		tmp = x;
	end
	tmp_2 = tmp;
end

Wolfram

code[x_, y_, z_, t_] := If[LessEqual[z, -8.6e+116], x, If[LessEqual[z, 2.8e+132], N[(x * N[(y / N[(t - z), $MachinePrecision]), $MachinePrecision]), $MachinePrecision], x]]

Derivation

1. Split input into 2 regimes

2. if z < -8.6e116 or 2.7999999999999999e132 < z

   1. Initial program 67.8%

      \[\frac{x \cdot \left(y - z\right)}{t - z} \]
   2. Add Preprocessing

   3. Taylor expanded in z around inf

      \[\leadsto \color{blue}{x} \]
   4. Step-by-step derivation

   5. Applied rewrites 72.2%

      \[\leadsto \color{blue}{x} \]

   if -8.6e116 < z < 2.7999999999999999e132

   1. Initial program 92.0%

      \[\frac{x \cdot \left(y - z\right)}{t - z} \]
   2. Add Preprocessing

   3. Taylor expanded in y around inf

      \[\leadsto \color{blue}{\frac{x \cdot y}{t - z}} \]
   4. Step-by-step derivation

      1. associate-/l* N/A

         \[\leadsto x \cdot \color{blue}{\frac{y}{t - z}} \]

      2. lower-*.f64 N/A

         \[\leadsto x \cdot \color{blue}{\frac{y}{t - z}} \]

      3. lower-/.f64 N/A

         \[\leadsto x \cdot \frac{y}{\color{blue}{t - z}} \]

      4. lift--.f64 67.1

         \[\leadsto x \cdot \frac{y}{t - \color{blue}{z}} \]

   5. Applied rewrites 67.1%

      \[\leadsto \color{blue}{x \cdot \frac{y}{t - z}} \]
3. Recombined 2 regimes into one program.
4. Add Preprocessing

Alternative 6: 60.4% accurate, 0.8× speedup

Math

\[\begin{array}{l} \\ \begin{array}{l} \mathbf{if}\;z \leq -7.6 \cdot 10^{+116}:\\ \;\;\;\;x\\ \mathbf{elif}\;z \leq 2.65 \cdot 10^{-30}:\\ \;\;\;\;x \cdot \frac{y}{t}\\ \mathbf{else}:\\ \;\;\;\;x\\ \end{array} \end{array} \]

FPCore

(FPCore (x y z t)
 :precision binary64
 (if (<= z -7.6e+116) x (if (<= z 2.65e-30) (* x (/ y t)) x)))

C

double code(double x, double y, double z, double t) {
	double tmp;
	if (z <= -7.6e+116) {
		tmp = x;
	} else if (z <= 2.65e-30) {
		tmp = x * (y / t);
	} else {
		tmp = x;
	}
	return tmp;
}

Fortran

module fmin_fmax_functions
    implicit none
    private
    public fmax
    public fmin

    interface fmax
        module procedure fmax88
        module procedure fmax44
        module procedure fmax84
        module procedure fmax48
    end interface
    interface fmin
        module procedure fmin88
        module procedure fmin44
        module procedure fmin84
        module procedure fmin48
    end interface
contains
    real(8) function fmax88(x, y) result (res)
        real(8), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(x, max(x, y), y /= y), x /= x)
    end function
    real(4) function fmax44(x, y) result (res)
        real(4), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(y, merge(x, max(x, y), y /= y), x /= x)
    end function
    real(8) function fmax84(x, y) result(res)
        real(8), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(dble(y), merge(x, max(x, dble(y)), y /= y), x /= x)
    end function
    real(8) function fmax48(x, y) result(res)
        real(4), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(dble(x), max(dble(x), y), y /= y), x /= x)
    end function
    real(8) function fmin88(x, y) result (res)
        real(8), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(x, min(x, y), y /= y), x /= x)
    end function
    real(4) function fmin44(x, y) result (res)
        real(4), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(y, merge(x, min(x, y), y /= y), x /= x)
    end function
    real(8) function fmin84(x, y) result(res)
        real(8), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(dble(y), merge(x, min(x, dble(y)), y /= y), x /= x)
    end function
    real(8) function fmin48(x, y) result(res)
        real(4), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(dble(x), min(dble(x), y), y /= y), x /= x)
    end function
end module

real(8) function code(x, y, z, t)
use fmin_fmax_functions
    real(8), intent (in) :: x
    real(8), intent (in) :: y
    real(8), intent (in) :: z
    real(8), intent (in) :: t
    real(8) :: tmp
    if (z <= (-7.6d+116)) then
        tmp = x
    else if (z <= 2.65d-30) then
        tmp = x * (y / t)
    else
        tmp = x
    end if
    code = tmp
end function

Java

public static double code(double x, double y, double z, double t) {
	double tmp;
	if (z <= -7.6e+116) {
		tmp = x;
	} else if (z <= 2.65e-30) {
		tmp = x * (y / t);
	} else {
		tmp = x;
	}
	return tmp;
}

Python

def code(x, y, z, t):
	tmp = 0
	if z <= -7.6e+116:
		tmp = x
	elif z <= 2.65e-30:
		tmp = x * (y / t)
	else:
		tmp = x
	return tmp

Julia

function code(x, y, z, t)
	tmp = 0.0
	if (z <= -7.6e+116)
		tmp = x;
	elseif (z <= 2.65e-30)
		tmp = Float64(x * Float64(y / t));
	else
		tmp = x;
	end
	return tmp
end

MATLAB

function tmp_2 = code(x, y, z, t)
	tmp = 0.0;
	if (z <= -7.6e+116)
		tmp = x;
	elseif (z <= 2.65e-30)
		tmp = x * (y / t);
	else
		tmp = x;
	end
	tmp_2 = tmp;
end

Wolfram

code[x_, y_, z_, t_] := If[LessEqual[z, -7.6e+116], x, If[LessEqual[z, 2.65e-30], N[(x * N[(y / t), $MachinePrecision]), $MachinePrecision], x]]

Derivation

1. Split input into 2 regimes

2. if z < -7.5999999999999998e116 or 2.64999999999999987e-30 < z

   1. Initial program 74.1%

      \[\frac{x \cdot \left(y - z\right)}{t - z} \]
   2. Add Preprocessing

   3. Taylor expanded in z around inf

      \[\leadsto \color{blue}{x} \]
   4. Step-by-step derivation

   5. Applied rewrites 61.3%

      \[\leadsto \color{blue}{x} \]

   if -7.5999999999999998e116 < z < 2.64999999999999987e-30

   1. Initial program 92.9%

      \[\frac{x \cdot \left(y - z\right)}{t - z} \]
   2. Add Preprocessing
   3. Step-by-step derivation

      1. lift--.f64 N/A

         \[\leadsto \frac{x \cdot \left(y - z\right)}{\color{blue}{t - z}} \]

      2. lift-/.f64 N/A

         \[\leadsto \color{blue}{\frac{x \cdot \left(y - z\right)}{t - z}} \]

      3. lift--.f64 N/A

         \[\leadsto \frac{x \cdot \color{blue}{\left(y - z\right)}}{t - z} \]

      4. lift-*.f64 N/A

         \[\leadsto \frac{\color{blue}{x \cdot \left(y - z\right)}}{t - z} \]

      5. associate-/l* N/A

         \[\leadsto \color{blue}{x \cdot \frac{y - z}{t - z}} \]

      6. lower-*.f64 N/A

         \[\leadsto \color{blue}{x \cdot \frac{y - z}{t - z}} \]

      7. lower-/.f64 N/A

         \[\leadsto x \cdot \color{blue}{\frac{y - z}{t - z}} \]

      8. lift--.f64 N/A

         \[\leadsto x \cdot \frac{\color{blue}{y - z}}{t - z} \]

      9. lift--.f64 95.5

         \[\leadsto x \cdot \frac{y - z}{\color{blue}{t - z}} \]

   4. Applied rewrites 95.5%

      \[\leadsto \color{blue}{x \cdot \frac{y - z}{t - z}} \]

   5. Taylor expanded in z around 0

      \[\leadsto x \cdot \color{blue}{\frac{y}{t}} \]
   6. Step-by-step derivation

      1. lower-/.f64 59.7

         \[\leadsto x \cdot \frac{y}{\color{blue}{t}} \]

   7. Applied rewrites 59.7%

      \[\leadsto x \cdot \color{blue}{\frac{y}{t}} \]
3. Recombined 2 regimes into one program.
4. Add Preprocessing

Alternative 7: 60.1% accurate, 0.8× speedup

Math

\[\begin{array}{l} \\ \begin{array}{l} \mathbf{if}\;z \leq -1.16 \cdot 10^{+79}:\\ \;\;\;\;x\\ \mathbf{elif}\;z \leq 2.65 \cdot 10^{-30}:\\ \;\;\;\;\frac{y \cdot x}{t}\\ \mathbf{else}:\\ \;\;\;\;x\\ \end{array} \end{array} \]

FPCore

(FPCore (x y z t)
 :precision binary64
 (if (<= z -1.16e+79) x (if (<= z 2.65e-30) (/ (* y x) t) x)))

C

double code(double x, double y, double z, double t) {
	double tmp;
	if (z <= -1.16e+79) {
		tmp = x;
	} else if (z <= 2.65e-30) {
		tmp = (y * x) / t;
	} else {
		tmp = x;
	}
	return tmp;
}

Fortran

module fmin_fmax_functions
    implicit none
    private
    public fmax
    public fmin

    interface fmax
        module procedure fmax88
        module procedure fmax44
        module procedure fmax84
        module procedure fmax48
    end interface
    interface fmin
        module procedure fmin88
        module procedure fmin44
        module procedure fmin84
        module procedure fmin48
    end interface
contains
    real(8) function fmax88(x, y) result (res)
        real(8), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(x, max(x, y), y /= y), x /= x)
    end function
    real(4) function fmax44(x, y) result (res)
        real(4), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(y, merge(x, max(x, y), y /= y), x /= x)
    end function
    real(8) function fmax84(x, y) result(res)
        real(8), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(dble(y), merge(x, max(x, dble(y)), y /= y), x /= x)
    end function
    real(8) function fmax48(x, y) result(res)
        real(4), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(dble(x), max(dble(x), y), y /= y), x /= x)
    end function
    real(8) function fmin88(x, y) result (res)
        real(8), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(x, min(x, y), y /= y), x /= x)
    end function
    real(4) function fmin44(x, y) result (res)
        real(4), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(y, merge(x, min(x, y), y /= y), x /= x)
    end function
    real(8) function fmin84(x, y) result(res)
        real(8), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(dble(y), merge(x, min(x, dble(y)), y /= y), x /= x)
    end function
    real(8) function fmin48(x, y) result(res)
        real(4), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(dble(x), min(dble(x), y), y /= y), x /= x)
    end function
end module

real(8) function code(x, y, z, t)
use fmin_fmax_functions
    real(8), intent (in) :: x
    real(8), intent (in) :: y
    real(8), intent (in) :: z
    real(8), intent (in) :: t
    real(8) :: tmp
    if (z <= (-1.16d+79)) then
        tmp = x
    else if (z <= 2.65d-30) then
        tmp = (y * x) / t
    else
        tmp = x
    end if
    code = tmp
end function

Java

public static double code(double x, double y, double z, double t) {
	double tmp;
	if (z <= -1.16e+79) {
		tmp = x;
	} else if (z <= 2.65e-30) {
		tmp = (y * x) / t;
	} else {
		tmp = x;
	}
	return tmp;
}

Python

def code(x, y, z, t):
	tmp = 0
	if z <= -1.16e+79:
		tmp = x
	elif z <= 2.65e-30:
		tmp = (y * x) / t
	else:
		tmp = x
	return tmp

Julia

function code(x, y, z, t)
	tmp = 0.0
	if (z <= -1.16e+79)
		tmp = x;
	elseif (z <= 2.65e-30)
		tmp = Float64(Float64(y * x) / t);
	else
		tmp = x;
	end
	return tmp
end

MATLAB

function tmp_2 = code(x, y, z, t)
	tmp = 0.0;
	if (z <= -1.16e+79)
		tmp = x;
	elseif (z <= 2.65e-30)
		tmp = (y * x) / t;
	else
		tmp = x;
	end
	tmp_2 = tmp;
end

Wolfram

code[x_, y_, z_, t_] := If[LessEqual[z, -1.16e+79], x, If[LessEqual[z, 2.65e-30], N[(N[(y * x), $MachinePrecision] / t), $MachinePrecision], x]]

Derivation

1. Split input into 2 regimes

2. if z < -1.16000000000000007e79 or 2.64999999999999987e-30 < z

   1. Initial program 74.8%

      \[\frac{x \cdot \left(y - z\right)}{t - z} \]
   2. Add Preprocessing

   3. Taylor expanded in z around inf

      \[\leadsto \color{blue}{x} \]
   4. Step-by-step derivation

   5. Applied rewrites 60.5%

      \[\leadsto \color{blue}{x} \]

   if -1.16000000000000007e79 < z < 2.64999999999999987e-30

   1. Initial program 93.4%

      \[\frac{x \cdot \left(y - z\right)}{t - z} \]
   2. Add Preprocessing

   3. Taylor expanded in z around 0

      \[\leadsto \color{blue}{\frac{x \cdot y}{t}} \]
   4. Step-by-step derivation

      1. lower-/.f64 N/A

         \[\leadsto \frac{x \cdot y}{\color{blue}{t}} \]

      2. *-commutative N/A

         \[\leadsto \frac{y \cdot x}{t} \]

      3. lower-*.f64 59.8

         \[\leadsto \frac{y \cdot x}{t} \]

   5. Applied rewrites 59.8%

      \[\leadsto \color{blue}{\frac{y \cdot x}{t}} \]
3. Recombined 2 regimes into one program.
4. Add Preprocessing

Alternative 8: 35.7% accurate, 23.0× speedup

Math

\[\begin{array}{l} \\ x \end{array} \]

FPCore

(FPCore (x y z t) :precision binary64 x)

C

double code(double x, double y, double z, double t) {
	return x;
}

Fortran

module fmin_fmax_functions
    implicit none
    private
    public fmax
    public fmin

    interface fmax
        module procedure fmax88
        module procedure fmax44
        module procedure fmax84
        module procedure fmax48
    end interface
    interface fmin
        module procedure fmin88
        module procedure fmin44
        module procedure fmin84
        module procedure fmin48
    end interface
contains
    real(8) function fmax88(x, y) result (res)
        real(8), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(x, max(x, y), y /= y), x /= x)
    end function
    real(4) function fmax44(x, y) result (res)
        real(4), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(y, merge(x, max(x, y), y /= y), x /= x)
    end function
    real(8) function fmax84(x, y) result(res)
        real(8), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(dble(y), merge(x, max(x, dble(y)), y /= y), x /= x)
    end function
    real(8) function fmax48(x, y) result(res)
        real(4), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(dble(x), max(dble(x), y), y /= y), x /= x)
    end function
    real(8) function fmin88(x, y) result (res)
        real(8), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(x, min(x, y), y /= y), x /= x)
    end function
    real(4) function fmin44(x, y) result (res)
        real(4), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(y, merge(x, min(x, y), y /= y), x /= x)
    end function
    real(8) function fmin84(x, y) result(res)
        real(8), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(dble(y), merge(x, min(x, dble(y)), y /= y), x /= x)
    end function
    real(8) function fmin48(x, y) result(res)
        real(4), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(dble(x), min(dble(x), y), y /= y), x /= x)
    end function
end module

real(8) function code(x, y, z, t)
use fmin_fmax_functions
    real(8), intent (in) :: x
    real(8), intent (in) :: y
    real(8), intent (in) :: z
    real(8), intent (in) :: t
    code = x
end function

Java

public static double code(double x, double y, double z, double t) {
	return x;
}

Python

def code(x, y, z, t):
	return x

Julia

function code(x, y, z, t)
	return x
end

MATLAB

function tmp = code(x, y, z, t)
	tmp = x;
end

Wolfram

code[x_, y_, z_, t_] := x

Derivation

1. Initial program 84.7%

   \[\frac{x \cdot \left(y - z\right)}{t - z} \]
2. Add Preprocessing

3. Taylor expanded in z around inf

   \[\leadsto \color{blue}{x} \]
4. Step-by-step derivation

5. Applied rewrites 35.7%

   \[\leadsto \color{blue}{x} \]
6. Add Preprocessing

Developer Target 1: 97.3% accurate, 0.8× speedup

Math

\[\begin{array}{l} \\ \frac{x}{\frac{t - z}{y - z}} \end{array} \]

FPCore

(FPCore (x y z t) :precision binary64 (/ x (/ (- t z) (- y z))))

C

double code(double x, double y, double z, double t) {
	return x / ((t - z) / (y - z));
}

Fortran

module fmin_fmax_functions
    implicit none
    private
    public fmax
    public fmin

    interface fmax
        module procedure fmax88
        module procedure fmax44
        module procedure fmax84
        module procedure fmax48
    end interface
    interface fmin
        module procedure fmin88
        module procedure fmin44
        module procedure fmin84
        module procedure fmin48
    end interface
contains
    real(8) function fmax88(x, y) result (res)
        real(8), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(x, max(x, y), y /= y), x /= x)
    end function
    real(4) function fmax44(x, y) result (res)
        real(4), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(y, merge(x, max(x, y), y /= y), x /= x)
    end function
    real(8) function fmax84(x, y) result(res)
        real(8), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(dble(y), merge(x, max(x, dble(y)), y /= y), x /= x)
    end function
    real(8) function fmax48(x, y) result(res)
        real(4), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(dble(x), max(dble(x), y), y /= y), x /= x)
    end function
    real(8) function fmin88(x, y) result (res)
        real(8), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(x, min(x, y), y /= y), x /= x)
    end function
    real(4) function fmin44(x, y) result (res)
        real(4), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(y, merge(x, min(x, y), y /= y), x /= x)
    end function
    real(8) function fmin84(x, y) result(res)
        real(8), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(dble(y), merge(x, min(x, dble(y)), y /= y), x /= x)
    end function
    real(8) function fmin48(x, y) result(res)
        real(4), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(dble(x), min(dble(x), y), y /= y), x /= x)
    end function
end module

real(8) function code(x, y, z, t)
use fmin_fmax_functions
    real(8), intent (in) :: x
    real(8), intent (in) :: y
    real(8), intent (in) :: z
    real(8), intent (in) :: t
    code = x / ((t - z) / (y - z))
end function

Java

public static double code(double x, double y, double z, double t) {
	return x / ((t - z) / (y - z));
}

Python

def code(x, y, z, t):
	return x / ((t - z) / (y - z))

Julia

function code(x, y, z, t)
	return Float64(x / Float64(Float64(t - z) / Float64(y - z)))
end

MATLAB

function tmp = code(x, y, z, t)
	tmp = x / ((t - z) / (y - z));
end

Wolfram

code[x_, y_, z_, t_] := N[(x / N[(N[(t - z), $MachinePrecision] / N[(y - z), $MachinePrecision]), $MachinePrecision]), $MachinePrecision]

Reproduce

herbie shell --seed 2025089 
(FPCore (x y z t)
  :name "Graphics.Rendering.Chart.Plot.AreaSpots:renderAreaSpots4D from Chart-1.5.3"
  :precision binary64

  :alt
  (! :herbie-platform default (/ x (/ (- t z) (- y z))))

  (/ (* x (- y z)) (- t z)))