Numeric.Histogram:binBounds from Chart-1.5.3

Percentage Accurate: 92.6% → 95.5%

Time: 5.2s

Alternatives: 11

Speedup: 1.1×

• 24.6% of points produce a very large (infinite) output. You may want to add a precondition.

Specification

Math

\[\begin{array}{l} \\ x + \frac{\left(y - x\right) \cdot z}{t} \end{array} \]

FPCore

(FPCore (x y z t) :precision binary64 (+ x (/ (* (- y x) z) t)))

C

double code(double x, double y, double z, double t) {
	return x + (((y - x) * z) / t);
}

Fortran

module fmin_fmax_functions
    implicit none
    private
    public fmax
    public fmin

    interface fmax
        module procedure fmax88
        module procedure fmax44
        module procedure fmax84
        module procedure fmax48
    end interface
    interface fmin
        module procedure fmin88
        module procedure fmin44
        module procedure fmin84
        module procedure fmin48
    end interface
contains
    real(8) function fmax88(x, y) result (res)
        real(8), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(x, max(x, y), y /= y), x /= x)
    end function
    real(4) function fmax44(x, y) result (res)
        real(4), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(y, merge(x, max(x, y), y /= y), x /= x)
    end function
    real(8) function fmax84(x, y) result(res)
        real(8), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(dble(y), merge(x, max(x, dble(y)), y /= y), x /= x)
    end function
    real(8) function fmax48(x, y) result(res)
        real(4), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(dble(x), max(dble(x), y), y /= y), x /= x)
    end function
    real(8) function fmin88(x, y) result (res)
        real(8), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(x, min(x, y), y /= y), x /= x)
    end function
    real(4) function fmin44(x, y) result (res)
        real(4), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(y, merge(x, min(x, y), y /= y), x /= x)
    end function
    real(8) function fmin84(x, y) result(res)
        real(8), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(dble(y), merge(x, min(x, dble(y)), y /= y), x /= x)
    end function
    real(8) function fmin48(x, y) result(res)
        real(4), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(dble(x), min(dble(x), y), y /= y), x /= x)
    end function
end module

real(8) function code(x, y, z, t)
use fmin_fmax_functions
    real(8), intent (in) :: x
    real(8), intent (in) :: y
    real(8), intent (in) :: z
    real(8), intent (in) :: t
    code = x + (((y - x) * z) / t)
end function

Java

public static double code(double x, double y, double z, double t) {
	return x + (((y - x) * z) / t);
}

Python

def code(x, y, z, t):
	return x + (((y - x) * z) / t)

Julia

function code(x, y, z, t)
	return Float64(x + Float64(Float64(Float64(y - x) * z) / t))
end

MATLAB

function tmp = code(x, y, z, t)
	tmp = x + (((y - x) * z) / t);
end

Wolfram

code[x_, y_, z_, t_] := N[(x + N[(N[(N[(y - x), $MachinePrecision] * z), $MachinePrecision] / t), $MachinePrecision]), $MachinePrecision]

Initial Program: 92.6% accurate, 1.0× speedup

Math

\[\begin{array}{l} \\ x + \frac{\left(y - x\right) \cdot z}{t} \end{array} \]

FPCore

(FPCore (x y z t) :precision binary64 (+ x (/ (* (- y x) z) t)))

C

double code(double x, double y, double z, double t) {
	return x + (((y - x) * z) / t);
}

Fortran

module fmin_fmax_functions
    implicit none
    private
    public fmax
    public fmin

    interface fmax
        module procedure fmax88
        module procedure fmax44
        module procedure fmax84
        module procedure fmax48
    end interface
    interface fmin
        module procedure fmin88
        module procedure fmin44
        module procedure fmin84
        module procedure fmin48
    end interface
contains
    real(8) function fmax88(x, y) result (res)
        real(8), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(x, max(x, y), y /= y), x /= x)
    end function
    real(4) function fmax44(x, y) result (res)
        real(4), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(y, merge(x, max(x, y), y /= y), x /= x)
    end function
    real(8) function fmax84(x, y) result(res)
        real(8), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(dble(y), merge(x, max(x, dble(y)), y /= y), x /= x)
    end function
    real(8) function fmax48(x, y) result(res)
        real(4), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(dble(x), max(dble(x), y), y /= y), x /= x)
    end function
    real(8) function fmin88(x, y) result (res)
        real(8), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(x, min(x, y), y /= y), x /= x)
    end function
    real(4) function fmin44(x, y) result (res)
        real(4), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(y, merge(x, min(x, y), y /= y), x /= x)
    end function
    real(8) function fmin84(x, y) result(res)
        real(8), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(dble(y), merge(x, min(x, dble(y)), y /= y), x /= x)
    end function
    real(8) function fmin48(x, y) result(res)
        real(4), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(dble(x), min(dble(x), y), y /= y), x /= x)
    end function
end module

real(8) function code(x, y, z, t)
use fmin_fmax_functions
    real(8), intent (in) :: x
    real(8), intent (in) :: y
    real(8), intent (in) :: z
    real(8), intent (in) :: t
    code = x + (((y - x) * z) / t)
end function

Java

public static double code(double x, double y, double z, double t) {
	return x + (((y - x) * z) / t);
}

Python

def code(x, y, z, t):
	return x + (((y - x) * z) / t)

Julia

function code(x, y, z, t)
	return Float64(x + Float64(Float64(Float64(y - x) * z) / t))
end

MATLAB

function tmp = code(x, y, z, t)
	tmp = x + (((y - x) * z) / t);
end

Wolfram

code[x_, y_, z_, t_] := N[(x + N[(N[(N[(y - x), $MachinePrecision] * z), $MachinePrecision] / t), $MachinePrecision]), $MachinePrecision]

Alternative 1: 95.5% accurate, 0.5× speedup

Math

\[\begin{array}{l} \\ \begin{array}{l} t_1 := x + \frac{\left(y - x\right) \cdot z}{t}\\ \mathbf{if}\;t\_1 \leq 10^{+297}:\\ \;\;\;\;t\_1\\ \mathbf{else}:\\ \;\;\;\;\mathsf{fma}\left(\frac{y - x}{t}, z, x\right)\\ \end{array} \end{array} \]

FPCore

(FPCore (x y z t)
 :precision binary64
 (let* ((t_1 (+ x (/ (* (- y x) z) t))))
   (if (<= t_1 1e+297) t_1 (fma (/ (- y x) t) z x))))

C

double code(double x, double y, double z, double t) {
	double t_1 = x + (((y - x) * z) / t);
	double tmp;
	if (t_1 <= 1e+297) {
		tmp = t_1;
	} else {
		tmp = fma(((y - x) / t), z, x);
	}
	return tmp;
}

Julia

function code(x, y, z, t)
	t_1 = Float64(x + Float64(Float64(Float64(y - x) * z) / t))
	tmp = 0.0
	if (t_1 <= 1e+297)
		tmp = t_1;
	else
		tmp = fma(Float64(Float64(y - x) / t), z, x);
	end
	return tmp
end

Wolfram

code[x_, y_, z_, t_] := Block[{t$95$1 = N[(x + N[(N[(N[(y - x), $MachinePrecision] * z), $MachinePrecision] / t), $MachinePrecision]), $MachinePrecision]}, If[LessEqual[t$95$1, 1e+297], t$95$1, N[(N[(N[(y - x), $MachinePrecision] / t), $MachinePrecision] * z + x), $MachinePrecision]]]

Derivation

1. Split input into 2 regimes

2. if (+.f64 x (/.f64 (*.f64 (-.f64 y x) z) t)) < 1e297

   1. Initial program 97.6%

      \[x + \frac{\left(y - x\right) \cdot z}{t} \]
   2. Add Preprocessing

   if 1e297 < (+.f64 x (/.f64 (*.f64 (-.f64 y x) z) t))

   1. Initial program 54.2%

      \[x + \frac{\left(y - x\right) \cdot z}{t} \]
   2. Add Preprocessing
   3. Step-by-step derivation

      1. lift-+.f64 N/A

         \[\leadsto \color{blue}{x + \frac{\left(y - x\right) \cdot z}{t}} \]

      2. +-commutative N/A

         \[\leadsto \color{blue}{\frac{\left(y - x\right) \cdot z}{t} + x} \]

      3. lift-/.f64 N/A

         \[\leadsto \color{blue}{\frac{\left(y - x\right) \cdot z}{t}} + x \]

      4. lift-*.f64 N/A

         \[\leadsto \frac{\color{blue}{\left(y - x\right) \cdot z}}{t} + x \]

      5. *-commutative N/A

         \[\leadsto \frac{\color{blue}{z \cdot \left(y - x\right)}}{t} + x \]

      6. associate-/l* N/A

         \[\leadsto \color{blue}{z \cdot \frac{y - x}{t}} + x \]

      7. *-commutative N/A

         \[\leadsto \color{blue}{\frac{y - x}{t} \cdot z} + x \]

      8. lower-fma.f64 N/A

         \[\leadsto \color{blue}{\mathsf{fma}\left(\frac{y - x}{t}, z, x\right)} \]

      9. lower-/.f64 99.9

         \[\leadsto \mathsf{fma}\left(\color{blue}{\frac{y - x}{t}}, z, x\right) \]

   4. Applied rewrites 99.9%

      \[\leadsto \color{blue}{\mathsf{fma}\left(\frac{y - x}{t}, z, x\right)} \]
3. Recombined 2 regimes into one program.
4. Add Preprocessing

Alternative 2: 83.3% accurate, 0.3× speedup

Math

\[\begin{array}{l} \\ \begin{array}{l} t_1 := x + \frac{\left(y - x\right) \cdot z}{t}\\ \mathbf{if}\;t\_1 \leq -1 \cdot 10^{+303} \lor \neg \left(t\_1 \leq 2 \cdot 10^{+199}\right):\\ \;\;\;\;\frac{y - x}{t} \cdot z\\ \mathbf{else}:\\ \;\;\;\;x + \frac{y \cdot z}{t}\\ \end{array} \end{array} \]

FPCore

(FPCore (x y z t)
 :precision binary64
 (let* ((t_1 (+ x (/ (* (- y x) z) t))))
   (if (or (<= t_1 -1e+303) (not (<= t_1 2e+199)))
     (* (/ (- y x) t) z)
     (+ x (/ (* y z) t)))))

C

double code(double x, double y, double z, double t) {
	double t_1 = x + (((y - x) * z) / t);
	double tmp;
	if ((t_1 <= -1e+303) || !(t_1 <= 2e+199)) {
		tmp = ((y - x) / t) * z;
	} else {
		tmp = x + ((y * z) / t);
	}
	return tmp;
}

Fortran

module fmin_fmax_functions
    implicit none
    private
    public fmax
    public fmin

    interface fmax
        module procedure fmax88
        module procedure fmax44
        module procedure fmax84
        module procedure fmax48
    end interface
    interface fmin
        module procedure fmin88
        module procedure fmin44
        module procedure fmin84
        module procedure fmin48
    end interface
contains
    real(8) function fmax88(x, y) result (res)
        real(8), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(x, max(x, y), y /= y), x /= x)
    end function
    real(4) function fmax44(x, y) result (res)
        real(4), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(y, merge(x, max(x, y), y /= y), x /= x)
    end function
    real(8) function fmax84(x, y) result(res)
        real(8), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(dble(y), merge(x, max(x, dble(y)), y /= y), x /= x)
    end function
    real(8) function fmax48(x, y) result(res)
        real(4), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(dble(x), max(dble(x), y), y /= y), x /= x)
    end function
    real(8) function fmin88(x, y) result (res)
        real(8), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(x, min(x, y), y /= y), x /= x)
    end function
    real(4) function fmin44(x, y) result (res)
        real(4), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(y, merge(x, min(x, y), y /= y), x /= x)
    end function
    real(8) function fmin84(x, y) result(res)
        real(8), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(dble(y), merge(x, min(x, dble(y)), y /= y), x /= x)
    end function
    real(8) function fmin48(x, y) result(res)
        real(4), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(dble(x), min(dble(x), y), y /= y), x /= x)
    end function
end module

real(8) function code(x, y, z, t)
use fmin_fmax_functions
    real(8), intent (in) :: x
    real(8), intent (in) :: y
    real(8), intent (in) :: z
    real(8), intent (in) :: t
    real(8) :: t_1
    real(8) :: tmp
    t_1 = x + (((y - x) * z) / t)
    if ((t_1 <= (-1d+303)) .or. (.not. (t_1 <= 2d+199))) then
        tmp = ((y - x) / t) * z
    else
        tmp = x + ((y * z) / t)
    end if
    code = tmp
end function

Java

public static double code(double x, double y, double z, double t) {
	double t_1 = x + (((y - x) * z) / t);
	double tmp;
	if ((t_1 <= -1e+303) || !(t_1 <= 2e+199)) {
		tmp = ((y - x) / t) * z;
	} else {
		tmp = x + ((y * z) / t);
	}
	return tmp;
}

Python

def code(x, y, z, t):
	t_1 = x + (((y - x) * z) / t)
	tmp = 0
	if (t_1 <= -1e+303) or not (t_1 <= 2e+199):
		tmp = ((y - x) / t) * z
	else:
		tmp = x + ((y * z) / t)
	return tmp

Julia

function code(x, y, z, t)
	t_1 = Float64(x + Float64(Float64(Float64(y - x) * z) / t))
	tmp = 0.0
	if ((t_1 <= -1e+303) || !(t_1 <= 2e+199))
		tmp = Float64(Float64(Float64(y - x) / t) * z);
	else
		tmp = Float64(x + Float64(Float64(y * z) / t));
	end
	return tmp
end

MATLAB

function tmp_2 = code(x, y, z, t)
	t_1 = x + (((y - x) * z) / t);
	tmp = 0.0;
	if ((t_1 <= -1e+303) || ~((t_1 <= 2e+199)))
		tmp = ((y - x) / t) * z;
	else
		tmp = x + ((y * z) / t);
	end
	tmp_2 = tmp;
end

Wolfram

code[x_, y_, z_, t_] := Block[{t$95$1 = N[(x + N[(N[(N[(y - x), $MachinePrecision] * z), $MachinePrecision] / t), $MachinePrecision]), $MachinePrecision]}, If[Or[LessEqual[t$95$1, -1e+303], N[Not[LessEqual[t$95$1, 2e+199]], $MachinePrecision]], N[(N[(N[(y - x), $MachinePrecision] / t), $MachinePrecision] * z), $MachinePrecision], N[(x + N[(N[(y * z), $MachinePrecision] / t), $MachinePrecision]), $MachinePrecision]]]

Derivation

1. Split input into 2 regimes

2. if (+.f64 x (/.f64 (*.f64 (-.f64 y x) z) t)) < -1e303 or 2.00000000000000019e199 < (+.f64 x (/.f64 (*.f64 (-.f64 y x) z) t))

   1. Initial program 79.0%

      \[x + \frac{\left(y - x\right) \cdot z}{t} \]
   2. Add Preprocessing

   3. Taylor expanded in x around 0

      \[\leadsto x + \frac{\color{blue}{y} \cdot z}{t} \]
   4. Step-by-step derivation

   5. Applied rewrites 51.7%

      \[\leadsto x + \frac{\color{blue}{y} \cdot z}{t} \]
   6. Step-by-step derivation

      1. lift-+.f64 N/A

         \[\leadsto \color{blue}{x + \frac{y \cdot z}{t}} \]

      2. +-commutative N/A

         \[\leadsto \color{blue}{\frac{y \cdot z}{t} + x} \]

      3. lift-/.f64 N/A

         \[\leadsto \color{blue}{\frac{y \cdot z}{t}} + x \]

      4. lift-*.f64 N/A

         \[\leadsto \frac{\color{blue}{y \cdot z}}{t} + x \]

      5. *-commutative N/A

         \[\leadsto \frac{\color{blue}{z \cdot y}}{t} + x \]

      6. associate-/l* N/A

         \[\leadsto \color{blue}{z \cdot \frac{y}{t}} + x \]

      7. lower-fma.f64 N/A

         \[\leadsto \color{blue}{\mathsf{fma}\left(z, \frac{y}{t}, x\right)} \]

      8. lower-/.f64 64.0

         \[\leadsto \mathsf{fma}\left(z, \color{blue}{\frac{y}{t}}, x\right) \]

   7. Applied rewrites 64.0%

      \[\leadsto \color{blue}{\mathsf{fma}\left(z, \frac{y}{t}, x\right)} \]

   8. Taylor expanded in z around inf

      \[\leadsto \color{blue}{z \cdot \left(\frac{y}{t} - \frac{x}{t}\right)} \]
   9. Step-by-step derivation

   10. Applied rewrites 87.6%

       \[\leadsto \color{blue}{\frac{y - x}{t} \cdot z} \]

   if -1e303 < (+.f64 x (/.f64 (*.f64 (-.f64 y x) z) t)) < 2.00000000000000019e199

   1. Initial program 98.6%

      \[x + \frac{\left(y - x\right) \cdot z}{t} \]
   2. Add Preprocessing

   3. Taylor expanded in x around 0

      \[\leadsto x + \frac{\color{blue}{y} \cdot z}{t} \]
   4. Step-by-step derivation

   5. Applied rewrites 87.4%

      \[\leadsto x + \frac{\color{blue}{y} \cdot z}{t} \]
3. Recombined 2 regimes into one program.

4. Final simplification 87.5%

   \[\leadsto \begin{array}{l} \mathbf{if}\;x + \frac{\left(y - x\right) \cdot z}{t} \leq -1 \cdot 10^{+303} \lor \neg \left(x + \frac{\left(y - x\right) \cdot z}{t} \leq 2 \cdot 10^{+199}\right):\\ \;\;\;\;\frac{y - x}{t} \cdot z\\ \mathbf{else}:\\ \;\;\;\;x + \frac{y \cdot z}{t}\\ \end{array} \]
5. Add Preprocessing

Alternative 3: 84.0% accurate, 0.7× speedup

Math

\[\begin{array}{l} \\ \begin{array}{l} \mathbf{if}\;t \leq -1.15 \cdot 10^{-76} \lor \neg \left(t \leq 4 \cdot 10^{-74}\right):\\ \;\;\;\;\mathsf{fma}\left(z, \frac{y}{t}, x\right)\\ \mathbf{else}:\\ \;\;\;\;\frac{\left(y - x\right) \cdot z}{t}\\ \end{array} \end{array} \]

FPCore

(FPCore (x y z t)
 :precision binary64
 (if (or (<= t -1.15e-76) (not (<= t 4e-74)))
   (fma z (/ y t) x)
   (/ (* (- y x) z) t)))

C

double code(double x, double y, double z, double t) {
	double tmp;
	if ((t <= -1.15e-76) || !(t <= 4e-74)) {
		tmp = fma(z, (y / t), x);
	} else {
		tmp = ((y - x) * z) / t;
	}
	return tmp;
}

Julia

function code(x, y, z, t)
	tmp = 0.0
	if ((t <= -1.15e-76) || !(t <= 4e-74))
		tmp = fma(z, Float64(y / t), x);
	else
		tmp = Float64(Float64(Float64(y - x) * z) / t);
	end
	return tmp
end

Wolfram

code[x_, y_, z_, t_] := If[Or[LessEqual[t, -1.15e-76], N[Not[LessEqual[t, 4e-74]], $MachinePrecision]], N[(z * N[(y / t), $MachinePrecision] + x), $MachinePrecision], N[(N[(N[(y - x), $MachinePrecision] * z), $MachinePrecision] / t), $MachinePrecision]]

Derivation

1. Split input into 2 regimes

2. if t < -1.15000000000000003e-76 or 3.99999999999999983e-74 < t

   1. Initial program 90.0%

      \[x + \frac{\left(y - x\right) \cdot z}{t} \]
   2. Add Preprocessing

   3. Taylor expanded in x around 0

      \[\leadsto x + \frac{\color{blue}{y} \cdot z}{t} \]
   4. Step-by-step derivation

   5. Applied rewrites 81.9%

      \[\leadsto x + \frac{\color{blue}{y} \cdot z}{t} \]
   6. Step-by-step derivation

      1. lift-+.f64 N/A

         \[\leadsto \color{blue}{x + \frac{y \cdot z}{t}} \]

      2. +-commutative N/A

         \[\leadsto \color{blue}{\frac{y \cdot z}{t} + x} \]

      3. lift-/.f64 N/A

         \[\leadsto \color{blue}{\frac{y \cdot z}{t}} + x \]

      4. lift-*.f64 N/A

         \[\leadsto \frac{\color{blue}{y \cdot z}}{t} + x \]

      5. *-commutative N/A

         \[\leadsto \frac{\color{blue}{z \cdot y}}{t} + x \]

      6. associate-/l* N/A

         \[\leadsto \color{blue}{z \cdot \frac{y}{t}} + x \]

      7. lower-fma.f64 N/A

         \[\leadsto \color{blue}{\mathsf{fma}\left(z, \frac{y}{t}, x\right)} \]

      8. lower-/.f64 85.4

         \[\leadsto \mathsf{fma}\left(z, \color{blue}{\frac{y}{t}}, x\right) \]

   7. Applied rewrites 85.4%

      \[\leadsto \color{blue}{\mathsf{fma}\left(z, \frac{y}{t}, x\right)} \]

   if -1.15000000000000003e-76 < t < 3.99999999999999983e-74

   1. Initial program 97.5%

      \[x + \frac{\left(y - x\right) \cdot z}{t} \]
   2. Add Preprocessing

   3. Taylor expanded in z around inf

      \[\leadsto \color{blue}{z \cdot \left(\frac{y}{t} - \frac{x}{t}\right)} \]
   4. Step-by-step derivation

   5. Applied rewrites 85.1%

      \[\leadsto \color{blue}{\frac{\left(y - x\right) \cdot z}{t}} \]
3. Recombined 2 regimes into one program.

4. Final simplification 85.3%

   \[\leadsto \begin{array}{l} \mathbf{if}\;t \leq -1.15 \cdot 10^{-76} \lor \neg \left(t \leq 4 \cdot 10^{-74}\right):\\ \;\;\;\;\mathsf{fma}\left(z, \frac{y}{t}, x\right)\\ \mathbf{else}:\\ \;\;\;\;\frac{\left(y - x\right) \cdot z}{t}\\ \end{array} \]
5. Add Preprocessing

Alternative 4: 84.0% accurate, 0.7× speedup

Math

\[\begin{array}{l} \\ \begin{array}{l} \mathbf{if}\;x \leq -1.85 \cdot 10^{-6} \lor \neg \left(x \leq 1.55 \cdot 10^{+84}\right):\\ \;\;\;\;\left(1 - \frac{z}{t}\right) \cdot x\\ \mathbf{else}:\\ \;\;\;\;\mathsf{fma}\left(z, \frac{y}{t}, x\right)\\ \end{array} \end{array} \]

FPCore

(FPCore (x y z t)
 :precision binary64
 (if (or (<= x -1.85e-6) (not (<= x 1.55e+84)))
   (* (- 1.0 (/ z t)) x)
   (fma z (/ y t) x)))

C

double code(double x, double y, double z, double t) {
	double tmp;
	if ((x <= -1.85e-6) || !(x <= 1.55e+84)) {
		tmp = (1.0 - (z / t)) * x;
	} else {
		tmp = fma(z, (y / t), x);
	}
	return tmp;
}

Julia

function code(x, y, z, t)
	tmp = 0.0
	if ((x <= -1.85e-6) || !(x <= 1.55e+84))
		tmp = Float64(Float64(1.0 - Float64(z / t)) * x);
	else
		tmp = fma(z, Float64(y / t), x);
	end
	return tmp
end

Wolfram

code[x_, y_, z_, t_] := If[Or[LessEqual[x, -1.85e-6], N[Not[LessEqual[x, 1.55e+84]], $MachinePrecision]], N[(N[(1.0 - N[(z / t), $MachinePrecision]), $MachinePrecision] * x), $MachinePrecision], N[(z * N[(y / t), $MachinePrecision] + x), $MachinePrecision]]

Derivation

1. Split input into 2 regimes

2. if x < -1.8500000000000001e-6 or 1.55000000000000001e84 < x

   1. Initial program 92.2%

      \[x + \frac{\left(y - x\right) \cdot z}{t} \]
   2. Add Preprocessing

   3. Taylor expanded in x around inf

      \[\leadsto \color{blue}{x \cdot \left(1 + -1 \cdot \frac{z}{t}\right)} \]
   4. Step-by-step derivation

   5. Applied rewrites 95.4%

      \[\leadsto \color{blue}{\left(1 - \frac{z}{t}\right) \cdot x} \]

   if -1.8500000000000001e-6 < x < 1.55000000000000001e84

   1. Initial program 93.0%

      \[x + \frac{\left(y - x\right) \cdot z}{t} \]
   2. Add Preprocessing

   3. Taylor expanded in x around 0

      \[\leadsto x + \frac{\color{blue}{y} \cdot z}{t} \]
   4. Step-by-step derivation

   5. Applied rewrites 81.8%

      \[\leadsto x + \frac{\color{blue}{y} \cdot z}{t} \]
   6. Step-by-step derivation

      1. lift-+.f64 N/A

         \[\leadsto \color{blue}{x + \frac{y \cdot z}{t}} \]

      2. +-commutative N/A

         \[\leadsto \color{blue}{\frac{y \cdot z}{t} + x} \]

      3. lift-/.f64 N/A

         \[\leadsto \color{blue}{\frac{y \cdot z}{t}} + x \]

      4. lift-*.f64 N/A

         \[\leadsto \frac{\color{blue}{y \cdot z}}{t} + x \]

      5. *-commutative N/A

         \[\leadsto \frac{\color{blue}{z \cdot y}}{t} + x \]

      6. associate-/l* N/A

         \[\leadsto \color{blue}{z \cdot \frac{y}{t}} + x \]

      7. lower-fma.f64 N/A

         \[\leadsto \color{blue}{\mathsf{fma}\left(z, \frac{y}{t}, x\right)} \]

      8. lower-/.f64 80.0

         \[\leadsto \mathsf{fma}\left(z, \color{blue}{\frac{y}{t}}, x\right) \]

   7. Applied rewrites 80.0%

      \[\leadsto \color{blue}{\mathsf{fma}\left(z, \frac{y}{t}, x\right)} \]
3. Recombined 2 regimes into one program.

4. Final simplification 85.2%

   \[\leadsto \begin{array}{l} \mathbf{if}\;x \leq -1.85 \cdot 10^{-6} \lor \neg \left(x \leq 1.55 \cdot 10^{+84}\right):\\ \;\;\;\;\left(1 - \frac{z}{t}\right) \cdot x\\ \mathbf{else}:\\ \;\;\;\;\mathsf{fma}\left(z, \frac{y}{t}, x\right)\\ \end{array} \]
5. Add Preprocessing

Alternative 5: 72.1% accurate, 0.7× speedup

Math

\[\begin{array}{l} \\ \begin{array}{l} \mathbf{if}\;t \leq -6.2 \cdot 10^{-211} \lor \neg \left(t \leq 1.22 \cdot 10^{-191}\right):\\ \;\;\;\;\mathsf{fma}\left(z, \frac{y}{t}, x\right)\\ \mathbf{else}:\\ \;\;\;\;\frac{-x}{t} \cdot z\\ \end{array} \end{array} \]

FPCore

(FPCore (x y z t)
 :precision binary64
 (if (or (<= t -6.2e-211) (not (<= t 1.22e-191)))
   (fma z (/ y t) x)
   (* (/ (- x) t) z)))

C

double code(double x, double y, double z, double t) {
	double tmp;
	if ((t <= -6.2e-211) || !(t <= 1.22e-191)) {
		tmp = fma(z, (y / t), x);
	} else {
		tmp = (-x / t) * z;
	}
	return tmp;
}

Julia

function code(x, y, z, t)
	tmp = 0.0
	if ((t <= -6.2e-211) || !(t <= 1.22e-191))
		tmp = fma(z, Float64(y / t), x);
	else
		tmp = Float64(Float64(Float64(-x) / t) * z);
	end
	return tmp
end

Wolfram

code[x_, y_, z_, t_] := If[Or[LessEqual[t, -6.2e-211], N[Not[LessEqual[t, 1.22e-191]], $MachinePrecision]], N[(z * N[(y / t), $MachinePrecision] + x), $MachinePrecision], N[(N[((-x) / t), $MachinePrecision] * z), $MachinePrecision]]

Derivation

1. Split input into 2 regimes

2. if t < -6.1999999999999999e-211 or 1.22e-191 < t

   1. Initial program 92.0%

      \[x + \frac{\left(y - x\right) \cdot z}{t} \]
   2. Add Preprocessing

   3. Taylor expanded in x around 0

      \[\leadsto x + \frac{\color{blue}{y} \cdot z}{t} \]
   4. Step-by-step derivation

   5. Applied rewrites 80.9%

      \[\leadsto x + \frac{\color{blue}{y} \cdot z}{t} \]
   6. Step-by-step derivation

      1. lift-+.f64 N/A

         \[\leadsto \color{blue}{x + \frac{y \cdot z}{t}} \]

      2. +-commutative N/A

         \[\leadsto \color{blue}{\frac{y \cdot z}{t} + x} \]

      3. lift-/.f64 N/A

         \[\leadsto \color{blue}{\frac{y \cdot z}{t}} + x \]

      4. lift-*.f64 N/A

         \[\leadsto \frac{\color{blue}{y \cdot z}}{t} + x \]

      5. *-commutative N/A

         \[\leadsto \frac{\color{blue}{z \cdot y}}{t} + x \]

      6. associate-/l* N/A

         \[\leadsto \color{blue}{z \cdot \frac{y}{t}} + x \]

      7. lower-fma.f64 N/A

         \[\leadsto \color{blue}{\mathsf{fma}\left(z, \frac{y}{t}, x\right)} \]

      8. lower-/.f64 82.0

         \[\leadsto \mathsf{fma}\left(z, \color{blue}{\frac{y}{t}}, x\right) \]

   7. Applied rewrites 82.0%

      \[\leadsto \color{blue}{\mathsf{fma}\left(z, \frac{y}{t}, x\right)} \]

   if -6.1999999999999999e-211 < t < 1.22e-191

   1. Initial program 97.3%

      \[x + \frac{\left(y - x\right) \cdot z}{t} \]
   2. Add Preprocessing

   3. Taylor expanded in x around inf

      \[\leadsto \color{blue}{x \cdot \left(1 + -1 \cdot \frac{z}{t}\right)} \]
   4. Step-by-step derivation

   5. Applied rewrites 61.2%

      \[\leadsto \color{blue}{\left(1 - \frac{z}{t}\right) \cdot x} \]

   6. Taylor expanded in z around inf

      \[\leadsto -1 \cdot \color{blue}{\frac{x \cdot z}{t}} \]
   7. Step-by-step derivation

   8. Applied rewrites 60.9%

      \[\leadsto \frac{-x}{t} \cdot \color{blue}{z} \]
3. Recombined 2 regimes into one program.

4. Final simplification 79.1%

   \[\leadsto \begin{array}{l} \mathbf{if}\;t \leq -6.2 \cdot 10^{-211} \lor \neg \left(t \leq 1.22 \cdot 10^{-191}\right):\\ \;\;\;\;\mathsf{fma}\left(z, \frac{y}{t}, x\right)\\ \mathbf{else}:\\ \;\;\;\;\frac{-x}{t} \cdot z\\ \end{array} \]
5. Add Preprocessing

Alternative 6: 48.9% accurate, 0.8× speedup

Math

\[\begin{array}{l} \\ \begin{array}{l} \mathbf{if}\;y \leq -2.05 \cdot 10^{-132} \lor \neg \left(y \leq 3.2 \cdot 10^{-91}\right):\\ \;\;\;\;\frac{y}{t} \cdot z\\ \mathbf{else}:\\ \;\;\;\;x\\ \end{array} \end{array} \]

FPCore

(FPCore (x y z t)
 :precision binary64
 (if (or (<= y -2.05e-132) (not (<= y 3.2e-91))) (* (/ y t) z) x))

C

double code(double x, double y, double z, double t) {
	double tmp;
	if ((y <= -2.05e-132) || !(y <= 3.2e-91)) {
		tmp = (y / t) * z;
	} else {
		tmp = x;
	}
	return tmp;
}

Fortran

module fmin_fmax_functions
    implicit none
    private
    public fmax
    public fmin

    interface fmax
        module procedure fmax88
        module procedure fmax44
        module procedure fmax84
        module procedure fmax48
    end interface
    interface fmin
        module procedure fmin88
        module procedure fmin44
        module procedure fmin84
        module procedure fmin48
    end interface
contains
    real(8) function fmax88(x, y) result (res)
        real(8), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(x, max(x, y), y /= y), x /= x)
    end function
    real(4) function fmax44(x, y) result (res)
        real(4), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(y, merge(x, max(x, y), y /= y), x /= x)
    end function
    real(8) function fmax84(x, y) result(res)
        real(8), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(dble(y), merge(x, max(x, dble(y)), y /= y), x /= x)
    end function
    real(8) function fmax48(x, y) result(res)
        real(4), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(dble(x), max(dble(x), y), y /= y), x /= x)
    end function
    real(8) function fmin88(x, y) result (res)
        real(8), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(x, min(x, y), y /= y), x /= x)
    end function
    real(4) function fmin44(x, y) result (res)
        real(4), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(y, merge(x, min(x, y), y /= y), x /= x)
    end function
    real(8) function fmin84(x, y) result(res)
        real(8), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(dble(y), merge(x, min(x, dble(y)), y /= y), x /= x)
    end function
    real(8) function fmin48(x, y) result(res)
        real(4), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(dble(x), min(dble(x), y), y /= y), x /= x)
    end function
end module

real(8) function code(x, y, z, t)
use fmin_fmax_functions
    real(8), intent (in) :: x
    real(8), intent (in) :: y
    real(8), intent (in) :: z
    real(8), intent (in) :: t
    real(8) :: tmp
    if ((y <= (-2.05d-132)) .or. (.not. (y <= 3.2d-91))) then
        tmp = (y / t) * z
    else
        tmp = x
    end if
    code = tmp
end function

Java

public static double code(double x, double y, double z, double t) {
	double tmp;
	if ((y <= -2.05e-132) || !(y <= 3.2e-91)) {
		tmp = (y / t) * z;
	} else {
		tmp = x;
	}
	return tmp;
}

Python

def code(x, y, z, t):
	tmp = 0
	if (y <= -2.05e-132) or not (y <= 3.2e-91):
		tmp = (y / t) * z
	else:
		tmp = x
	return tmp

Julia

function code(x, y, z, t)
	tmp = 0.0
	if ((y <= -2.05e-132) || !(y <= 3.2e-91))
		tmp = Float64(Float64(y / t) * z);
	else
		tmp = x;
	end
	return tmp
end

MATLAB

function tmp_2 = code(x, y, z, t)
	tmp = 0.0;
	if ((y <= -2.05e-132) || ~((y <= 3.2e-91)))
		tmp = (y / t) * z;
	else
		tmp = x;
	end
	tmp_2 = tmp;
end

Wolfram

code[x_, y_, z_, t_] := If[Or[LessEqual[y, -2.05e-132], N[Not[LessEqual[y, 3.2e-91]], $MachinePrecision]], N[(N[(y / t), $MachinePrecision] * z), $MachinePrecision], x]

Derivation

1. Split input into 2 regimes

2. if y < -2.05000000000000003e-132 or 3.19999999999999996e-91 < y

   1. Initial program 89.9%

      \[x + \frac{\left(y - x\right) \cdot z}{t} \]
   2. Add Preprocessing

   3. Taylor expanded in x around 0

      \[\leadsto \color{blue}{\frac{y \cdot z}{t}} \]
   4. Step-by-step derivation

   5. Applied rewrites 55.4%

      \[\leadsto \color{blue}{\frac{y}{t} \cdot z} \]

   if -2.05000000000000003e-132 < y < 3.19999999999999996e-91

   1. Initial program 97.9%

      \[x + \frac{\left(y - x\right) \cdot z}{t} \]
   2. Add Preprocessing

   3. Taylor expanded in z around 0

      \[\leadsto \color{blue}{x} \]
   4. Step-by-step derivation

   5. Applied rewrites 61.8%

      \[\leadsto \color{blue}{x} \]
3. Recombined 2 regimes into one program.

4. Final simplification 57.7%

   \[\leadsto \begin{array}{l} \mathbf{if}\;y \leq -2.05 \cdot 10^{-132} \lor \neg \left(y \leq 3.2 \cdot 10^{-91}\right):\\ \;\;\;\;\frac{y}{t} \cdot z\\ \mathbf{else}:\\ \;\;\;\;x\\ \end{array} \]
5. Add Preprocessing

Alternative 7: 50.0% accurate, 0.8× speedup

Math

\[\begin{array}{l} \\ \begin{array}{l} \mathbf{if}\;y \leq -2.05 \cdot 10^{-132}:\\ \;\;\;\;\frac{y}{t} \cdot z\\ \mathbf{elif}\;y \leq 3.2 \cdot 10^{-91}:\\ \;\;\;\;x\\ \mathbf{else}:\\ \;\;\;\;\frac{z}{t} \cdot y\\ \end{array} \end{array} \]

FPCore

(FPCore (x y z t)
 :precision binary64
 (if (<= y -2.05e-132) (* (/ y t) z) (if (<= y 3.2e-91) x (* (/ z t) y))))

C

double code(double x, double y, double z, double t) {
	double tmp;
	if (y <= -2.05e-132) {
		tmp = (y / t) * z;
	} else if (y <= 3.2e-91) {
		tmp = x;
	} else {
		tmp = (z / t) * y;
	}
	return tmp;
}

Fortran

module fmin_fmax_functions
    implicit none
    private
    public fmax
    public fmin

    interface fmax
        module procedure fmax88
        module procedure fmax44
        module procedure fmax84
        module procedure fmax48
    end interface
    interface fmin
        module procedure fmin88
        module procedure fmin44
        module procedure fmin84
        module procedure fmin48
    end interface
contains
    real(8) function fmax88(x, y) result (res)
        real(8), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(x, max(x, y), y /= y), x /= x)
    end function
    real(4) function fmax44(x, y) result (res)
        real(4), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(y, merge(x, max(x, y), y /= y), x /= x)
    end function
    real(8) function fmax84(x, y) result(res)
        real(8), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(dble(y), merge(x, max(x, dble(y)), y /= y), x /= x)
    end function
    real(8) function fmax48(x, y) result(res)
        real(4), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(dble(x), max(dble(x), y), y /= y), x /= x)
    end function
    real(8) function fmin88(x, y) result (res)
        real(8), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(x, min(x, y), y /= y), x /= x)
    end function
    real(4) function fmin44(x, y) result (res)
        real(4), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(y, merge(x, min(x, y), y /= y), x /= x)
    end function
    real(8) function fmin84(x, y) result(res)
        real(8), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(dble(y), merge(x, min(x, dble(y)), y /= y), x /= x)
    end function
    real(8) function fmin48(x, y) result(res)
        real(4), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(dble(x), min(dble(x), y), y /= y), x /= x)
    end function
end module

real(8) function code(x, y, z, t)
use fmin_fmax_functions
    real(8), intent (in) :: x
    real(8), intent (in) :: y
    real(8), intent (in) :: z
    real(8), intent (in) :: t
    real(8) :: tmp
    if (y <= (-2.05d-132)) then
        tmp = (y / t) * z
    else if (y <= 3.2d-91) then
        tmp = x
    else
        tmp = (z / t) * y
    end if
    code = tmp
end function

Java

public static double code(double x, double y, double z, double t) {
	double tmp;
	if (y <= -2.05e-132) {
		tmp = (y / t) * z;
	} else if (y <= 3.2e-91) {
		tmp = x;
	} else {
		tmp = (z / t) * y;
	}
	return tmp;
}

Python

def code(x, y, z, t):
	tmp = 0
	if y <= -2.05e-132:
		tmp = (y / t) * z
	elif y <= 3.2e-91:
		tmp = x
	else:
		tmp = (z / t) * y
	return tmp

Julia

function code(x, y, z, t)
	tmp = 0.0
	if (y <= -2.05e-132)
		tmp = Float64(Float64(y / t) * z);
	elseif (y <= 3.2e-91)
		tmp = x;
	else
		tmp = Float64(Float64(z / t) * y);
	end
	return tmp
end

MATLAB

function tmp_2 = code(x, y, z, t)
	tmp = 0.0;
	if (y <= -2.05e-132)
		tmp = (y / t) * z;
	elseif (y <= 3.2e-91)
		tmp = x;
	else
		tmp = (z / t) * y;
	end
	tmp_2 = tmp;
end

Wolfram

code[x_, y_, z_, t_] := If[LessEqual[y, -2.05e-132], N[(N[(y / t), $MachinePrecision] * z), $MachinePrecision], If[LessEqual[y, 3.2e-91], x, N[(N[(z / t), $MachinePrecision] * y), $MachinePrecision]]]

Derivation

1. Split input into 3 regimes

2. if y < -2.05000000000000003e-132

   1. Initial program 86.0%

      \[x + \frac{\left(y - x\right) \cdot z}{t} \]
   2. Add Preprocessing

   3. Taylor expanded in x around 0

      \[\leadsto \color{blue}{\frac{y \cdot z}{t}} \]
   4. Step-by-step derivation

   5. Applied rewrites 63.6%

      \[\leadsto \color{blue}{\frac{y}{t} \cdot z} \]

   if -2.05000000000000003e-132 < y < 3.19999999999999996e-91

   1. Initial program 97.9%

      \[x + \frac{\left(y - x\right) \cdot z}{t} \]
   2. Add Preprocessing

   3. Taylor expanded in z around 0

      \[\leadsto \color{blue}{x} \]
   4. Step-by-step derivation

   5. Applied rewrites 61.8%

      \[\leadsto \color{blue}{x} \]

   if 3.19999999999999996e-91 < y

   1. Initial program 94.0%

      \[x + \frac{\left(y - x\right) \cdot z}{t} \]
   2. Add Preprocessing
   3. Step-by-step derivation

      1. lift-+.f64 N/A

         \[\leadsto \color{blue}{x + \frac{\left(y - x\right) \cdot z}{t}} \]

      2. +-commutative N/A

         \[\leadsto \color{blue}{\frac{\left(y - x\right) \cdot z}{t} + x} \]

      3. lift-/.f64 N/A

         \[\leadsto \color{blue}{\frac{\left(y - x\right) \cdot z}{t}} + x \]

      4. lift-*.f64 N/A

         \[\leadsto \frac{\color{blue}{\left(y - x\right) \cdot z}}{t} + x \]

      5. associate-/l* N/A

         \[\leadsto \color{blue}{\left(y - x\right) \cdot \frac{z}{t}} + x \]

      6. *-commutative N/A

         \[\leadsto \color{blue}{\frac{z}{t} \cdot \left(y - x\right)} + x \]

      7. lower-fma.f64 N/A

         \[\leadsto \color{blue}{\mathsf{fma}\left(\frac{z}{t}, y - x, x\right)} \]

      8. lower-/.f64 96.2

         \[\leadsto \mathsf{fma}\left(\color{blue}{\frac{z}{t}}, y - x, x\right) \]

   4. Applied rewrites 96.2%

      \[\leadsto \color{blue}{\mathsf{fma}\left(\frac{z}{t}, y - x, x\right)} \]

   5. Taylor expanded in x around 0

      \[\leadsto \color{blue}{\frac{y \cdot z}{t}} \]
   6. Step-by-step derivation

   7. Applied rewrites 54.4%

      \[\leadsto \color{blue}{\frac{z}{t} \cdot y} \]
3. Recombined 3 regimes into one program.

4. Final simplification 60.1%

   \[\leadsto \begin{array}{l} \mathbf{if}\;y \leq -2.05 \cdot 10^{-132}:\\ \;\;\;\;\frac{y}{t} \cdot z\\ \mathbf{elif}\;y \leq 3.2 \cdot 10^{-91}:\\ \;\;\;\;x\\ \mathbf{else}:\\ \;\;\;\;\frac{z}{t} \cdot y\\ \end{array} \]
5. Add Preprocessing

Alternative 8: 48.8% accurate, 0.8× speedup

Math

\[\begin{array}{l} \\ \begin{array}{l} \mathbf{if}\;y \leq -2.05 \cdot 10^{-132}:\\ \;\;\;\;\frac{y}{t} \cdot z\\ \mathbf{elif}\;y \leq 3.2 \cdot 10^{-91}:\\ \;\;\;\;x\\ \mathbf{else}:\\ \;\;\;\;\frac{y \cdot z}{t}\\ \end{array} \end{array} \]

FPCore

(FPCore (x y z t)
 :precision binary64
 (if (<= y -2.05e-132) (* (/ y t) z) (if (<= y 3.2e-91) x (/ (* y z) t))))

C

double code(double x, double y, double z, double t) {
	double tmp;
	if (y <= -2.05e-132) {
		tmp = (y / t) * z;
	} else if (y <= 3.2e-91) {
		tmp = x;
	} else {
		tmp = (y * z) / t;
	}
	return tmp;
}

Fortran

module fmin_fmax_functions
    implicit none
    private
    public fmax
    public fmin

    interface fmax
        module procedure fmax88
        module procedure fmax44
        module procedure fmax84
        module procedure fmax48
    end interface
    interface fmin
        module procedure fmin88
        module procedure fmin44
        module procedure fmin84
        module procedure fmin48
    end interface
contains
    real(8) function fmax88(x, y) result (res)
        real(8), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(x, max(x, y), y /= y), x /= x)
    end function
    real(4) function fmax44(x, y) result (res)
        real(4), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(y, merge(x, max(x, y), y /= y), x /= x)
    end function
    real(8) function fmax84(x, y) result(res)
        real(8), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(dble(y), merge(x, max(x, dble(y)), y /= y), x /= x)
    end function
    real(8) function fmax48(x, y) result(res)
        real(4), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(dble(x), max(dble(x), y), y /= y), x /= x)
    end function
    real(8) function fmin88(x, y) result (res)
        real(8), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(x, min(x, y), y /= y), x /= x)
    end function
    real(4) function fmin44(x, y) result (res)
        real(4), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(y, merge(x, min(x, y), y /= y), x /= x)
    end function
    real(8) function fmin84(x, y) result(res)
        real(8), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(dble(y), merge(x, min(x, dble(y)), y /= y), x /= x)
    end function
    real(8) function fmin48(x, y) result(res)
        real(4), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(dble(x), min(dble(x), y), y /= y), x /= x)
    end function
end module

real(8) function code(x, y, z, t)
use fmin_fmax_functions
    real(8), intent (in) :: x
    real(8), intent (in) :: y
    real(8), intent (in) :: z
    real(8), intent (in) :: t
    real(8) :: tmp
    if (y <= (-2.05d-132)) then
        tmp = (y / t) * z
    else if (y <= 3.2d-91) then
        tmp = x
    else
        tmp = (y * z) / t
    end if
    code = tmp
end function

Java

public static double code(double x, double y, double z, double t) {
	double tmp;
	if (y <= -2.05e-132) {
		tmp = (y / t) * z;
	} else if (y <= 3.2e-91) {
		tmp = x;
	} else {
		tmp = (y * z) / t;
	}
	return tmp;
}

Python

def code(x, y, z, t):
	tmp = 0
	if y <= -2.05e-132:
		tmp = (y / t) * z
	elif y <= 3.2e-91:
		tmp = x
	else:
		tmp = (y * z) / t
	return tmp

Julia

function code(x, y, z, t)
	tmp = 0.0
	if (y <= -2.05e-132)
		tmp = Float64(Float64(y / t) * z);
	elseif (y <= 3.2e-91)
		tmp = x;
	else
		tmp = Float64(Float64(y * z) / t);
	end
	return tmp
end

MATLAB

function tmp_2 = code(x, y, z, t)
	tmp = 0.0;
	if (y <= -2.05e-132)
		tmp = (y / t) * z;
	elseif (y <= 3.2e-91)
		tmp = x;
	else
		tmp = (y * z) / t;
	end
	tmp_2 = tmp;
end

Wolfram

code[x_, y_, z_, t_] := If[LessEqual[y, -2.05e-132], N[(N[(y / t), $MachinePrecision] * z), $MachinePrecision], If[LessEqual[y, 3.2e-91], x, N[(N[(y * z), $MachinePrecision] / t), $MachinePrecision]]]

Derivation

1. Split input into 3 regimes

2. if y < -2.05000000000000003e-132

   1. Initial program 86.0%

      \[x + \frac{\left(y - x\right) \cdot z}{t} \]
   2. Add Preprocessing

   3. Taylor expanded in x around 0

      \[\leadsto \color{blue}{\frac{y \cdot z}{t}} \]
   4. Step-by-step derivation

   5. Applied rewrites 63.6%

      \[\leadsto \color{blue}{\frac{y}{t} \cdot z} \]

   if -2.05000000000000003e-132 < y < 3.19999999999999996e-91

   1. Initial program 97.9%

      \[x + \frac{\left(y - x\right) \cdot z}{t} \]
   2. Add Preprocessing

   3. Taylor expanded in z around 0

      \[\leadsto \color{blue}{x} \]
   4. Step-by-step derivation

   5. Applied rewrites 61.8%

      \[\leadsto \color{blue}{x} \]

   if 3.19999999999999996e-91 < y

   1. Initial program 94.0%

      \[x + \frac{\left(y - x\right) \cdot z}{t} \]
   2. Add Preprocessing

   3. Taylor expanded in x around 0

      \[\leadsto \color{blue}{\frac{y \cdot z}{t}} \]
   4. Step-by-step derivation

   5. Applied rewrites 46.7%

      \[\leadsto \color{blue}{\frac{y}{t} \cdot z} \]
   6. Step-by-step derivation

   7. Applied rewrites 53.6%

      \[\leadsto \frac{y \cdot z}{\color{blue}{t}} \]
3. Recombined 3 regimes into one program.
4. Add Preprocessing

Alternative 9: 97.5% accurate, 1.1× speedup

Math

\[\begin{array}{l} \\ \mathsf{fma}\left(\frac{z}{t}, y - x, x\right) \end{array} \]

FPCore

(FPCore (x y z t) :precision binary64 (fma (/ z t) (- y x) x))

C

double code(double x, double y, double z, double t) {
	return fma((z / t), (y - x), x);
}

Julia

function code(x, y, z, t)
	return fma(Float64(z / t), Float64(y - x), x)
end

Wolfram

code[x_, y_, z_, t_] := N[(N[(z / t), $MachinePrecision] * N[(y - x), $MachinePrecision] + x), $MachinePrecision]

Derivation

1. Initial program 92.7%

   \[x + \frac{\left(y - x\right) \cdot z}{t} \]
2. Add Preprocessing
3. Step-by-step derivation

   1. lift-+.f64 N/A

      \[\leadsto \color{blue}{x + \frac{\left(y - x\right) \cdot z}{t}} \]

   2. +-commutative N/A

      \[\leadsto \color{blue}{\frac{\left(y - x\right) \cdot z}{t} + x} \]

   3. lift-/.f64 N/A

      \[\leadsto \color{blue}{\frac{\left(y - x\right) \cdot z}{t}} + x \]

   4. lift-*.f64 N/A

      \[\leadsto \frac{\color{blue}{\left(y - x\right) \cdot z}}{t} + x \]

   5. associate-/l* N/A

      \[\leadsto \color{blue}{\left(y - x\right) \cdot \frac{z}{t}} + x \]

   6. *-commutative N/A

      \[\leadsto \color{blue}{\frac{z}{t} \cdot \left(y - x\right)} + x \]

   7. lower-fma.f64 N/A

      \[\leadsto \color{blue}{\mathsf{fma}\left(\frac{z}{t}, y - x, x\right)} \]

   8. lower-/.f64 95.0

      \[\leadsto \mathsf{fma}\left(\color{blue}{\frac{z}{t}}, y - x, x\right) \]

4. Applied rewrites 95.0%

   \[\leadsto \color{blue}{\mathsf{fma}\left(\frac{z}{t}, y - x, x\right)} \]
5. Add Preprocessing

Alternative 10: 72.9% accurate, 1.3× speedup

Math

\[\begin{array}{l} \\ \mathsf{fma}\left(z, \frac{y}{t}, x\right) \end{array} \]

FPCore

(FPCore (x y z t) :precision binary64 (fma z (/ y t) x))

C

double code(double x, double y, double z, double t) {
	return fma(z, (y / t), x);
}

Julia

function code(x, y, z, t)
	return fma(z, Float64(y / t), x)
end

Wolfram

code[x_, y_, z_, t_] := N[(z * N[(y / t), $MachinePrecision] + x), $MachinePrecision]

Derivation

1. Initial program 92.7%

   \[x + \frac{\left(y - x\right) \cdot z}{t} \]
2. Add Preprocessing

3. Taylor expanded in x around 0

   \[\leadsto x + \frac{\color{blue}{y} \cdot z}{t} \]
4. Step-by-step derivation

5. Applied rewrites 76.7%

   \[\leadsto x + \frac{\color{blue}{y} \cdot z}{t} \]
6. Step-by-step derivation

   1. lift-+.f64 N/A

      \[\leadsto \color{blue}{x + \frac{y \cdot z}{t}} \]

   2. +-commutative N/A

      \[\leadsto \color{blue}{\frac{y \cdot z}{t} + x} \]

   3. lift-/.f64 N/A

      \[\leadsto \color{blue}{\frac{y \cdot z}{t}} + x \]

   4. lift-*.f64 N/A

      \[\leadsto \frac{\color{blue}{y \cdot z}}{t} + x \]

   5. *-commutative N/A

      \[\leadsto \frac{\color{blue}{z \cdot y}}{t} + x \]

   6. associate-/l* N/A

      \[\leadsto \color{blue}{z \cdot \frac{y}{t}} + x \]

   7. lower-fma.f64 N/A

      \[\leadsto \color{blue}{\mathsf{fma}\left(z, \frac{y}{t}, x\right)} \]

   8. lower-/.f64 75.8

      \[\leadsto \mathsf{fma}\left(z, \color{blue}{\frac{y}{t}}, x\right) \]

7. Applied rewrites 75.8%

   \[\leadsto \color{blue}{\mathsf{fma}\left(z, \frac{y}{t}, x\right)} \]
8. Add Preprocessing

Alternative 11: 38.4% accurate, 23.0× speedup

Math

\[\begin{array}{l} \\ x \end{array} \]

FPCore

(FPCore (x y z t) :precision binary64 x)

C

double code(double x, double y, double z, double t) {
	return x;
}

Fortran

module fmin_fmax_functions
    implicit none
    private
    public fmax
    public fmin

    interface fmax
        module procedure fmax88
        module procedure fmax44
        module procedure fmax84
        module procedure fmax48
    end interface
    interface fmin
        module procedure fmin88
        module procedure fmin44
        module procedure fmin84
        module procedure fmin48
    end interface
contains
    real(8) function fmax88(x, y) result (res)
        real(8), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(x, max(x, y), y /= y), x /= x)
    end function
    real(4) function fmax44(x, y) result (res)
        real(4), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(y, merge(x, max(x, y), y /= y), x /= x)
    end function
    real(8) function fmax84(x, y) result(res)
        real(8), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(dble(y), merge(x, max(x, dble(y)), y /= y), x /= x)
    end function
    real(8) function fmax48(x, y) result(res)
        real(4), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(dble(x), max(dble(x), y), y /= y), x /= x)
    end function
    real(8) function fmin88(x, y) result (res)
        real(8), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(x, min(x, y), y /= y), x /= x)
    end function
    real(4) function fmin44(x, y) result (res)
        real(4), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(y, merge(x, min(x, y), y /= y), x /= x)
    end function
    real(8) function fmin84(x, y) result(res)
        real(8), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(dble(y), merge(x, min(x, dble(y)), y /= y), x /= x)
    end function
    real(8) function fmin48(x, y) result(res)
        real(4), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(dble(x), min(dble(x), y), y /= y), x /= x)
    end function
end module

real(8) function code(x, y, z, t)
use fmin_fmax_functions
    real(8), intent (in) :: x
    real(8), intent (in) :: y
    real(8), intent (in) :: z
    real(8), intent (in) :: t
    code = x
end function

Java

public static double code(double x, double y, double z, double t) {
	return x;
}

Python

def code(x, y, z, t):
	return x

Julia

function code(x, y, z, t)
	return x
end

MATLAB

function tmp = code(x, y, z, t)
	tmp = x;
end

Wolfram

code[x_, y_, z_, t_] := x

Derivation

1. Initial program 92.7%

   \[x + \frac{\left(y - x\right) \cdot z}{t} \]
2. Add Preprocessing

3. Taylor expanded in z around 0

   \[\leadsto \color{blue}{x} \]
4. Step-by-step derivation

5. Applied rewrites 39.7%

   \[\leadsto \color{blue}{x} \]
6. Add Preprocessing

Developer Target 1: 97.7% accurate, 0.6× speedup

Math

\[\begin{array}{l} \\ \begin{array}{l} \mathbf{if}\;x < -9.025511195533005 \cdot 10^{-135}:\\ \;\;\;\;x - \frac{z}{t} \cdot \left(x - y\right)\\ \mathbf{elif}\;x < 4.275032163700715 \cdot 10^{-250}:\\ \;\;\;\;x + \frac{y - x}{t} \cdot z\\ \mathbf{else}:\\ \;\;\;\;x + \frac{y - x}{\frac{t}{z}}\\ \end{array} \end{array} \]

FPCore

(FPCore (x y z t)
 :precision binary64
 (if (< x -9.025511195533005e-135)
   (- x (* (/ z t) (- x y)))
   (if (< x 4.275032163700715e-250)
     (+ x (* (/ (- y x) t) z))
     (+ x (/ (- y x) (/ t z))))))

C

double code(double x, double y, double z, double t) {
	double tmp;
	if (x < -9.025511195533005e-135) {
		tmp = x - ((z / t) * (x - y));
	} else if (x < 4.275032163700715e-250) {
		tmp = x + (((y - x) / t) * z);
	} else {
		tmp = x + ((y - x) / (t / z));
	}
	return tmp;
}

Fortran

module fmin_fmax_functions
    implicit none
    private
    public fmax
    public fmin

    interface fmax
        module procedure fmax88
        module procedure fmax44
        module procedure fmax84
        module procedure fmax48
    end interface
    interface fmin
        module procedure fmin88
        module procedure fmin44
        module procedure fmin84
        module procedure fmin48
    end interface
contains
    real(8) function fmax88(x, y) result (res)
        real(8), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(x, max(x, y), y /= y), x /= x)
    end function
    real(4) function fmax44(x, y) result (res)
        real(4), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(y, merge(x, max(x, y), y /= y), x /= x)
    end function
    real(8) function fmax84(x, y) result(res)
        real(8), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(dble(y), merge(x, max(x, dble(y)), y /= y), x /= x)
    end function
    real(8) function fmax48(x, y) result(res)
        real(4), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(dble(x), max(dble(x), y), y /= y), x /= x)
    end function
    real(8) function fmin88(x, y) result (res)
        real(8), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(x, min(x, y), y /= y), x /= x)
    end function
    real(4) function fmin44(x, y) result (res)
        real(4), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(y, merge(x, min(x, y), y /= y), x /= x)
    end function
    real(8) function fmin84(x, y) result(res)
        real(8), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(dble(y), merge(x, min(x, dble(y)), y /= y), x /= x)
    end function
    real(8) function fmin48(x, y) result(res)
        real(4), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(dble(x), min(dble(x), y), y /= y), x /= x)
    end function
end module

real(8) function code(x, y, z, t)
use fmin_fmax_functions
    real(8), intent (in) :: x
    real(8), intent (in) :: y
    real(8), intent (in) :: z
    real(8), intent (in) :: t
    real(8) :: tmp
    if (x < (-9.025511195533005d-135)) then
        tmp = x - ((z / t) * (x - y))
    else if (x < 4.275032163700715d-250) then
        tmp = x + (((y - x) / t) * z)
    else
        tmp = x + ((y - x) / (t / z))
    end if
    code = tmp
end function

Java

public static double code(double x, double y, double z, double t) {
	double tmp;
	if (x < -9.025511195533005e-135) {
		tmp = x - ((z / t) * (x - y));
	} else if (x < 4.275032163700715e-250) {
		tmp = x + (((y - x) / t) * z);
	} else {
		tmp = x + ((y - x) / (t / z));
	}
	return tmp;
}

Python

def code(x, y, z, t):
	tmp = 0
	if x < -9.025511195533005e-135:
		tmp = x - ((z / t) * (x - y))
	elif x < 4.275032163700715e-250:
		tmp = x + (((y - x) / t) * z)
	else:
		tmp = x + ((y - x) / (t / z))
	return tmp

Julia

function code(x, y, z, t)
	tmp = 0.0
	if (x < -9.025511195533005e-135)
		tmp = Float64(x - Float64(Float64(z / t) * Float64(x - y)));
	elseif (x < 4.275032163700715e-250)
		tmp = Float64(x + Float64(Float64(Float64(y - x) / t) * z));
	else
		tmp = Float64(x + Float64(Float64(y - x) / Float64(t / z)));
	end
	return tmp
end

MATLAB

function tmp_2 = code(x, y, z, t)
	tmp = 0.0;
	if (x < -9.025511195533005e-135)
		tmp = x - ((z / t) * (x - y));
	elseif (x < 4.275032163700715e-250)
		tmp = x + (((y - x) / t) * z);
	else
		tmp = x + ((y - x) / (t / z));
	end
	tmp_2 = tmp;
end

Wolfram

code[x_, y_, z_, t_] := If[Less[x, -9.025511195533005e-135], N[(x - N[(N[(z / t), $MachinePrecision] * N[(x - y), $MachinePrecision]), $MachinePrecision]), $MachinePrecision], If[Less[x, 4.275032163700715e-250], N[(x + N[(N[(N[(y - x), $MachinePrecision] / t), $MachinePrecision] * z), $MachinePrecision]), $MachinePrecision], N[(x + N[(N[(y - x), $MachinePrecision] / N[(t / z), $MachinePrecision]), $MachinePrecision]), $MachinePrecision]]]

Reproduce

herbie shell --seed 2025026 
(FPCore (x y z t)
  :name "Numeric.Histogram:binBounds from Chart-1.5.3"
  :precision binary64

  :alt
  (! :herbie-platform default (if (< x -1805102239106601/200000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000) (- x (* (/ z t) (- x y))) (if (< x 855006432740143/2000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000) (+ x (* (/ (- y x) t) z)) (+ x (/ (- y x) (/ t z))))))

  (+ x (/ (* (- y x) z) t)))