Graphics.Rendering.Chart.Drawing:drawTextsR from Chart-1.5.3

Percentage Accurate: 98.1% → 100.0%

Time: 4.7s

Alternatives: 7

Speedup: 1.4×

• 20.8% of points produce a very large (infinite) output. You may want to add a precondition.

Specification

Math

\[\begin{array}{l} \\ x \cdot y + \left(x - 1\right) \cdot z \end{array} \]

FPCore

(FPCore (x y z) :precision binary64 (+ (* x y) (* (- x 1.0) z)))

C

double code(double x, double y, double z) {
	return (x * y) + ((x - 1.0) * z);
}

Fortran

module fmin_fmax_functions
    implicit none
    private
    public fmax
    public fmin

    interface fmax
        module procedure fmax88
        module procedure fmax44
        module procedure fmax84
        module procedure fmax48
    end interface
    interface fmin
        module procedure fmin88
        module procedure fmin44
        module procedure fmin84
        module procedure fmin48
    end interface
contains
    real(8) function fmax88(x, y) result (res)
        real(8), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(x, max(x, y), y /= y), x /= x)
    end function
    real(4) function fmax44(x, y) result (res)
        real(4), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(y, merge(x, max(x, y), y /= y), x /= x)
    end function
    real(8) function fmax84(x, y) result(res)
        real(8), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(dble(y), merge(x, max(x, dble(y)), y /= y), x /= x)
    end function
    real(8) function fmax48(x, y) result(res)
        real(4), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(dble(x), max(dble(x), y), y /= y), x /= x)
    end function
    real(8) function fmin88(x, y) result (res)
        real(8), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(x, min(x, y), y /= y), x /= x)
    end function
    real(4) function fmin44(x, y) result (res)
        real(4), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(y, merge(x, min(x, y), y /= y), x /= x)
    end function
    real(8) function fmin84(x, y) result(res)
        real(8), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(dble(y), merge(x, min(x, dble(y)), y /= y), x /= x)
    end function
    real(8) function fmin48(x, y) result(res)
        real(4), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(dble(x), min(dble(x), y), y /= y), x /= x)
    end function
end module

real(8) function code(x, y, z)
use fmin_fmax_functions
    real(8), intent (in) :: x
    real(8), intent (in) :: y
    real(8), intent (in) :: z
    code = (x * y) + ((x - 1.0d0) * z)
end function

Java

public static double code(double x, double y, double z) {
	return (x * y) + ((x - 1.0) * z);
}

Python

def code(x, y, z):
	return (x * y) + ((x - 1.0) * z)

Julia

function code(x, y, z)
	return Float64(Float64(x * y) + Float64(Float64(x - 1.0) * z))
end

MATLAB

function tmp = code(x, y, z)
	tmp = (x * y) + ((x - 1.0) * z);
end

Wolfram

code[x_, y_, z_] := N[(N[(x * y), $MachinePrecision] + N[(N[(x - 1.0), $MachinePrecision] * z), $MachinePrecision]), $MachinePrecision]

Initial Program: 98.1% accurate, 1.0× speedup

Math

\[\begin{array}{l} \\ x \cdot y + \left(x - 1\right) \cdot z \end{array} \]

FPCore

(FPCore (x y z) :precision binary64 (+ (* x y) (* (- x 1.0) z)))

C

double code(double x, double y, double z) {
	return (x * y) + ((x - 1.0) * z);
}

Fortran

module fmin_fmax_functions
    implicit none
    private
    public fmax
    public fmin

    interface fmax
        module procedure fmax88
        module procedure fmax44
        module procedure fmax84
        module procedure fmax48
    end interface
    interface fmin
        module procedure fmin88
        module procedure fmin44
        module procedure fmin84
        module procedure fmin48
    end interface
contains
    real(8) function fmax88(x, y) result (res)
        real(8), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(x, max(x, y), y /= y), x /= x)
    end function
    real(4) function fmax44(x, y) result (res)
        real(4), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(y, merge(x, max(x, y), y /= y), x /= x)
    end function
    real(8) function fmax84(x, y) result(res)
        real(8), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(dble(y), merge(x, max(x, dble(y)), y /= y), x /= x)
    end function
    real(8) function fmax48(x, y) result(res)
        real(4), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(dble(x), max(dble(x), y), y /= y), x /= x)
    end function
    real(8) function fmin88(x, y) result (res)
        real(8), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(x, min(x, y), y /= y), x /= x)
    end function
    real(4) function fmin44(x, y) result (res)
        real(4), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(y, merge(x, min(x, y), y /= y), x /= x)
    end function
    real(8) function fmin84(x, y) result(res)
        real(8), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(dble(y), merge(x, min(x, dble(y)), y /= y), x /= x)
    end function
    real(8) function fmin48(x, y) result(res)
        real(4), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(dble(x), min(dble(x), y), y /= y), x /= x)
    end function
end module

real(8) function code(x, y, z)
use fmin_fmax_functions
    real(8), intent (in) :: x
    real(8), intent (in) :: y
    real(8), intent (in) :: z
    code = (x * y) + ((x - 1.0d0) * z)
end function

Java

public static double code(double x, double y, double z) {
	return (x * y) + ((x - 1.0) * z);
}

Python

def code(x, y, z):
	return (x * y) + ((x - 1.0) * z)

Julia

function code(x, y, z)
	return Float64(Float64(x * y) + Float64(Float64(x - 1.0) * z))
end

MATLAB

function tmp = code(x, y, z)
	tmp = (x * y) + ((x - 1.0) * z);
end

Wolfram

code[x_, y_, z_] := N[(N[(x * y), $MachinePrecision] + N[(N[(x - 1.0), $MachinePrecision] * z), $MachinePrecision]), $MachinePrecision]

Alternative 1: 100.0% accurate, 1.4× speedup

Math

\[\begin{array}{l} \\ \mathsf{fma}\left(z + y, x, -z\right) \end{array} \]

FPCore

(FPCore (x y z) :precision binary64 (fma (+ z y) x (- z)))

C

double code(double x, double y, double z) {
	return fma((z + y), x, -z);
}

Julia

function code(x, y, z)
	return fma(Float64(z + y), x, Float64(-z))
end

Wolfram

code[x_, y_, z_] := N[(N[(z + y), $MachinePrecision] * x + (-z)), $MachinePrecision]

Derivation

1. Initial program 98.8%

   \[x \cdot y + \left(x - 1\right) \cdot z \]
2. Add Preprocessing

3. Taylor expanded in x around 0

   \[\leadsto \color{blue}{-1 \cdot z + x \cdot \left(y + z\right)} \]

5. Applied rewrites 100.0%

   \[\leadsto \color{blue}{\mathsf{fma}\left(z + y, x, -z\right)} \]
6. Add Preprocessing

Alternative 2: 61.4% accurate, 0.6× speedup

Math

\[\begin{array}{l} \\ \begin{array}{l} \mathbf{if}\;x \leq -1.15 \cdot 10^{-34}:\\ \;\;\;\;y \cdot x\\ \mathbf{elif}\;x \leq 2.6 \cdot 10^{-11}:\\ \;\;\;\;-z\\ \mathbf{elif}\;x \leq 2.3 \cdot 10^{+28} \lor \neg \left(x \leq 8.5 \cdot 10^{+125}\right):\\ \;\;\;\;y \cdot x\\ \mathbf{else}:\\ \;\;\;\;x \cdot z\\ \end{array} \end{array} \]

FPCore

(FPCore (x y z)
 :precision binary64
 (if (<= x -1.15e-34)
   (* y x)
   (if (<= x 2.6e-11)
     (- z)
     (if (or (<= x 2.3e+28) (not (<= x 8.5e+125))) (* y x) (* x z)))))

C

double code(double x, double y, double z) {
	double tmp;
	if (x <= -1.15e-34) {
		tmp = y * x;
	} else if (x <= 2.6e-11) {
		tmp = -z;
	} else if ((x <= 2.3e+28) || !(x <= 8.5e+125)) {
		tmp = y * x;
	} else {
		tmp = x * z;
	}
	return tmp;
}

Fortran

module fmin_fmax_functions
    implicit none
    private
    public fmax
    public fmin

    interface fmax
        module procedure fmax88
        module procedure fmax44
        module procedure fmax84
        module procedure fmax48
    end interface
    interface fmin
        module procedure fmin88
        module procedure fmin44
        module procedure fmin84
        module procedure fmin48
    end interface
contains
    real(8) function fmax88(x, y) result (res)
        real(8), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(x, max(x, y), y /= y), x /= x)
    end function
    real(4) function fmax44(x, y) result (res)
        real(4), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(y, merge(x, max(x, y), y /= y), x /= x)
    end function
    real(8) function fmax84(x, y) result(res)
        real(8), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(dble(y), merge(x, max(x, dble(y)), y /= y), x /= x)
    end function
    real(8) function fmax48(x, y) result(res)
        real(4), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(dble(x), max(dble(x), y), y /= y), x /= x)
    end function
    real(8) function fmin88(x, y) result (res)
        real(8), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(x, min(x, y), y /= y), x /= x)
    end function
    real(4) function fmin44(x, y) result (res)
        real(4), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(y, merge(x, min(x, y), y /= y), x /= x)
    end function
    real(8) function fmin84(x, y) result(res)
        real(8), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(dble(y), merge(x, min(x, dble(y)), y /= y), x /= x)
    end function
    real(8) function fmin48(x, y) result(res)
        real(4), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(dble(x), min(dble(x), y), y /= y), x /= x)
    end function
end module

real(8) function code(x, y, z)
use fmin_fmax_functions
    real(8), intent (in) :: x
    real(8), intent (in) :: y
    real(8), intent (in) :: z
    real(8) :: tmp
    if (x <= (-1.15d-34)) then
        tmp = y * x
    else if (x <= 2.6d-11) then
        tmp = -z
    else if ((x <= 2.3d+28) .or. (.not. (x <= 8.5d+125))) then
        tmp = y * x
    else
        tmp = x * z
    end if
    code = tmp
end function

Java

public static double code(double x, double y, double z) {
	double tmp;
	if (x <= -1.15e-34) {
		tmp = y * x;
	} else if (x <= 2.6e-11) {
		tmp = -z;
	} else if ((x <= 2.3e+28) || !(x <= 8.5e+125)) {
		tmp = y * x;
	} else {
		tmp = x * z;
	}
	return tmp;
}

Python

def code(x, y, z):
	tmp = 0
	if x <= -1.15e-34:
		tmp = y * x
	elif x <= 2.6e-11:
		tmp = -z
	elif (x <= 2.3e+28) or not (x <= 8.5e+125):
		tmp = y * x
	else:
		tmp = x * z
	return tmp

Julia

function code(x, y, z)
	tmp = 0.0
	if (x <= -1.15e-34)
		tmp = Float64(y * x);
	elseif (x <= 2.6e-11)
		tmp = Float64(-z);
	elseif ((x <= 2.3e+28) || !(x <= 8.5e+125))
		tmp = Float64(y * x);
	else
		tmp = Float64(x * z);
	end
	return tmp
end

MATLAB

function tmp_2 = code(x, y, z)
	tmp = 0.0;
	if (x <= -1.15e-34)
		tmp = y * x;
	elseif (x <= 2.6e-11)
		tmp = -z;
	elseif ((x <= 2.3e+28) || ~((x <= 8.5e+125)))
		tmp = y * x;
	else
		tmp = x * z;
	end
	tmp_2 = tmp;
end

Wolfram

code[x_, y_, z_] := If[LessEqual[x, -1.15e-34], N[(y * x), $MachinePrecision], If[LessEqual[x, 2.6e-11], (-z), If[Or[LessEqual[x, 2.3e+28], N[Not[LessEqual[x, 8.5e+125]], $MachinePrecision]], N[(y * x), $MachinePrecision], N[(x * z), $MachinePrecision]]]]

Derivation

1. Split input into 3 regimes

2. if x < -1.15000000000000006e-34 or 2.6000000000000001e-11 < x < 2.29999999999999984e28 or 8.49999999999999974e125 < x

   1. Initial program 97.3%

      \[x \cdot y + \left(x - 1\right) \cdot z \]
   2. Add Preprocessing

   3. Taylor expanded in x around inf

      \[\leadsto \color{blue}{x \cdot \left(y + z\right)} \]
   4. Step-by-step derivation

      1. *-commutative N/A

         \[\leadsto \color{blue}{\left(y + z\right) \cdot x} \]

      2. lower-*.f64 N/A

         \[\leadsto \color{blue}{\left(y + z\right) \cdot x} \]

      3. +-commutative N/A

         \[\leadsto \color{blue}{\left(z + y\right)} \cdot x \]

      4. lower-+.f64 96.6

         \[\leadsto \color{blue}{\left(z + y\right)} \cdot x \]

   5. Applied rewrites 96.6%

      \[\leadsto \color{blue}{\left(z + y\right) \cdot x} \]
   6. Step-by-step derivation

   7. Applied rewrites 95.7%

      \[\leadsto \mathsf{fma}\left(z, \color{blue}{x}, y \cdot x\right) \]

   8. Taylor expanded in y around 0

      \[\leadsto x \cdot \color{blue}{z} \]
   9. Step-by-step derivation

   10. Applied rewrites 36.0%

       \[\leadsto x \cdot \color{blue}{z} \]

   11. Taylor expanded in y around inf

       \[\leadsto \color{blue}{x \cdot y} \]
   12. Step-by-step derivation

       1. *-commutative N/A

          \[\leadsto \color{blue}{y \cdot x} \]

       2. lower-*.f64 65.7

          \[\leadsto \color{blue}{y \cdot x} \]

   13. Applied rewrites 65.7%

       \[\leadsto \color{blue}{y \cdot x} \]

   if -1.15000000000000006e-34 < x < 2.6000000000000001e-11

   1. Initial program 100.0%

      \[x \cdot y + \left(x - 1\right) \cdot z \]
   2. Add Preprocessing

   3. Taylor expanded in x around 0

      \[\leadsto \color{blue}{-1 \cdot z} \]
   4. Step-by-step derivation

      1. mul-1-neg N/A

         \[\leadsto \color{blue}{\mathsf{neg}\left(z\right)} \]

      2. lower-neg.f64 80.1

         \[\leadsto \color{blue}{-z} \]

   5. Applied rewrites 80.1%

      \[\leadsto \color{blue}{-z} \]

   if 2.29999999999999984e28 < x < 8.49999999999999974e125

   1. Initial program 99.9%

      \[x \cdot y + \left(x - 1\right) \cdot z \]
   2. Add Preprocessing

   3. Taylor expanded in x around inf

      \[\leadsto \color{blue}{x \cdot \left(y + z\right)} \]
   4. Step-by-step derivation

      1. *-commutative N/A

         \[\leadsto \color{blue}{\left(y + z\right) \cdot x} \]

      2. lower-*.f64 N/A

         \[\leadsto \color{blue}{\left(y + z\right) \cdot x} \]

      3. +-commutative N/A

         \[\leadsto \color{blue}{\left(z + y\right)} \cdot x \]

      4. lower-+.f64 99.9

         \[\leadsto \color{blue}{\left(z + y\right)} \cdot x \]

   5. Applied rewrites 99.9%

      \[\leadsto \color{blue}{\left(z + y\right) \cdot x} \]
   6. Step-by-step derivation

   7. Applied rewrites 100.0%

      \[\leadsto \mathsf{fma}\left(z, \color{blue}{x}, y \cdot x\right) \]

   8. Taylor expanded in y around 0

      \[\leadsto x \cdot \color{blue}{z} \]
   9. Step-by-step derivation

   10. Applied rewrites 77.1%

       \[\leadsto x \cdot \color{blue}{z} \]
3. Recombined 3 regimes into one program.

4. Final simplification 73.7%

   \[\leadsto \begin{array}{l} \mathbf{if}\;x \leq -1.15 \cdot 10^{-34}:\\ \;\;\;\;y \cdot x\\ \mathbf{elif}\;x \leq 2.6 \cdot 10^{-11}:\\ \;\;\;\;-z\\ \mathbf{elif}\;x \leq 2.3 \cdot 10^{+28} \lor \neg \left(x \leq 8.5 \cdot 10^{+125}\right):\\ \;\;\;\;y \cdot x\\ \mathbf{else}:\\ \;\;\;\;x \cdot z\\ \end{array} \]
5. Add Preprocessing

Alternative 3: 84.4% accurate, 0.8× speedup

Math

\[\begin{array}{l} \\ \begin{array}{l} \mathbf{if}\;x \leq -1.15 \cdot 10^{-34} \lor \neg \left(x \leq 5.7 \cdot 10^{-8}\right):\\ \;\;\;\;\left(z + y\right) \cdot x\\ \mathbf{else}:\\ \;\;\;\;\left(-1 + x\right) \cdot z\\ \end{array} \end{array} \]

FPCore

(FPCore (x y z)
 :precision binary64
 (if (or (<= x -1.15e-34) (not (<= x 5.7e-8))) (* (+ z y) x) (* (+ -1.0 x) z)))

C

double code(double x, double y, double z) {
	double tmp;
	if ((x <= -1.15e-34) || !(x <= 5.7e-8)) {
		tmp = (z + y) * x;
	} else {
		tmp = (-1.0 + x) * z;
	}
	return tmp;
}

Fortran

module fmin_fmax_functions
    implicit none
    private
    public fmax
    public fmin

    interface fmax
        module procedure fmax88
        module procedure fmax44
        module procedure fmax84
        module procedure fmax48
    end interface
    interface fmin
        module procedure fmin88
        module procedure fmin44
        module procedure fmin84
        module procedure fmin48
    end interface
contains
    real(8) function fmax88(x, y) result (res)
        real(8), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(x, max(x, y), y /= y), x /= x)
    end function
    real(4) function fmax44(x, y) result (res)
        real(4), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(y, merge(x, max(x, y), y /= y), x /= x)
    end function
    real(8) function fmax84(x, y) result(res)
        real(8), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(dble(y), merge(x, max(x, dble(y)), y /= y), x /= x)
    end function
    real(8) function fmax48(x, y) result(res)
        real(4), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(dble(x), max(dble(x), y), y /= y), x /= x)
    end function
    real(8) function fmin88(x, y) result (res)
        real(8), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(x, min(x, y), y /= y), x /= x)
    end function
    real(4) function fmin44(x, y) result (res)
        real(4), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(y, merge(x, min(x, y), y /= y), x /= x)
    end function
    real(8) function fmin84(x, y) result(res)
        real(8), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(dble(y), merge(x, min(x, dble(y)), y /= y), x /= x)
    end function
    real(8) function fmin48(x, y) result(res)
        real(4), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(dble(x), min(dble(x), y), y /= y), x /= x)
    end function
end module

real(8) function code(x, y, z)
use fmin_fmax_functions
    real(8), intent (in) :: x
    real(8), intent (in) :: y
    real(8), intent (in) :: z
    real(8) :: tmp
    if ((x <= (-1.15d-34)) .or. (.not. (x <= 5.7d-8))) then
        tmp = (z + y) * x
    else
        tmp = ((-1.0d0) + x) * z
    end if
    code = tmp
end function

Java

public static double code(double x, double y, double z) {
	double tmp;
	if ((x <= -1.15e-34) || !(x <= 5.7e-8)) {
		tmp = (z + y) * x;
	} else {
		tmp = (-1.0 + x) * z;
	}
	return tmp;
}

Python

def code(x, y, z):
	tmp = 0
	if (x <= -1.15e-34) or not (x <= 5.7e-8):
		tmp = (z + y) * x
	else:
		tmp = (-1.0 + x) * z
	return tmp

Julia

function code(x, y, z)
	tmp = 0.0
	if ((x <= -1.15e-34) || !(x <= 5.7e-8))
		tmp = Float64(Float64(z + y) * x);
	else
		tmp = Float64(Float64(-1.0 + x) * z);
	end
	return tmp
end

MATLAB

function tmp_2 = code(x, y, z)
	tmp = 0.0;
	if ((x <= -1.15e-34) || ~((x <= 5.7e-8)))
		tmp = (z + y) * x;
	else
		tmp = (-1.0 + x) * z;
	end
	tmp_2 = tmp;
end

Wolfram

code[x_, y_, z_] := If[Or[LessEqual[x, -1.15e-34], N[Not[LessEqual[x, 5.7e-8]], $MachinePrecision]], N[(N[(z + y), $MachinePrecision] * x), $MachinePrecision], N[(N[(-1.0 + x), $MachinePrecision] * z), $MachinePrecision]]

Derivation

1. Split input into 2 regimes

2. if x < -1.15000000000000006e-34 or 5.70000000000000009e-8 < x

   1. Initial program 97.7%

      \[x \cdot y + \left(x - 1\right) \cdot z \]
   2. Add Preprocessing

   3. Taylor expanded in x around inf

      \[\leadsto \color{blue}{x \cdot \left(y + z\right)} \]
   4. Step-by-step derivation

      1. *-commutative N/A

         \[\leadsto \color{blue}{\left(y + z\right) \cdot x} \]

      2. lower-*.f64 N/A

         \[\leadsto \color{blue}{\left(y + z\right) \cdot x} \]

      3. +-commutative N/A

         \[\leadsto \color{blue}{\left(z + y\right)} \cdot x \]

      4. lower-+.f64 97.1

         \[\leadsto \color{blue}{\left(z + y\right)} \cdot x \]

   5. Applied rewrites 97.1%

      \[\leadsto \color{blue}{\left(z + y\right) \cdot x} \]

   if -1.15000000000000006e-34 < x < 5.70000000000000009e-8

   1. Initial program 100.0%

      \[x \cdot y + \left(x - 1\right) \cdot z \]
   2. Add Preprocessing

   3. Taylor expanded in y around 0

      \[\leadsto \color{blue}{z \cdot \left(x - 1\right)} \]
   4. Step-by-step derivation

      1. distribute-rgt-out-- N/A

         \[\leadsto \color{blue}{x \cdot z - 1 \cdot z} \]

      2. metadata-eval N/A

         \[\leadsto x \cdot z - \color{blue}{\left(\mathsf{neg}\left(-1\right)\right)} \cdot z \]

      3. fp-cancel-sign-sub-inv N/A

         \[\leadsto \color{blue}{x \cdot z + -1 \cdot z} \]

      4. +-commutative N/A

         \[\leadsto \color{blue}{-1 \cdot z + x \cdot z} \]

      5. distribute-rgt-out N/A

         \[\leadsto \color{blue}{z \cdot \left(-1 + x\right)} \]

      6. *-commutative N/A

         \[\leadsto \color{blue}{\left(-1 + x\right) \cdot z} \]

      7. lower-*.f64 N/A

         \[\leadsto \color{blue}{\left(-1 + x\right) \cdot z} \]

      8. lower-+.f64 80.3

         \[\leadsto \color{blue}{\left(-1 + x\right)} \cdot z \]

   5. Applied rewrites 80.3%

      \[\leadsto \color{blue}{\left(-1 + x\right) \cdot z} \]
3. Recombined 2 regimes into one program.

4. Final simplification 88.9%

   \[\leadsto \begin{array}{l} \mathbf{if}\;x \leq -1.15 \cdot 10^{-34} \lor \neg \left(x \leq 5.7 \cdot 10^{-8}\right):\\ \;\;\;\;\left(z + y\right) \cdot x\\ \mathbf{else}:\\ \;\;\;\;\left(-1 + x\right) \cdot z\\ \end{array} \]
5. Add Preprocessing

Alternative 4: 75.7% accurate, 0.8× speedup

Math

\[\begin{array}{l} \\ \begin{array}{l} \mathbf{if}\;y \leq -1.2 \cdot 10^{+121} \lor \neg \left(y \leq 1.15 \cdot 10^{+44}\right):\\ \;\;\;\;y \cdot x\\ \mathbf{else}:\\ \;\;\;\;\left(-1 + x\right) \cdot z\\ \end{array} \end{array} \]

FPCore

(FPCore (x y z)
 :precision binary64
 (if (or (<= y -1.2e+121) (not (<= y 1.15e+44))) (* y x) (* (+ -1.0 x) z)))

C

double code(double x, double y, double z) {
	double tmp;
	if ((y <= -1.2e+121) || !(y <= 1.15e+44)) {
		tmp = y * x;
	} else {
		tmp = (-1.0 + x) * z;
	}
	return tmp;
}

Fortran

module fmin_fmax_functions
    implicit none
    private
    public fmax
    public fmin

    interface fmax
        module procedure fmax88
        module procedure fmax44
        module procedure fmax84
        module procedure fmax48
    end interface
    interface fmin
        module procedure fmin88
        module procedure fmin44
        module procedure fmin84
        module procedure fmin48
    end interface
contains
    real(8) function fmax88(x, y) result (res)
        real(8), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(x, max(x, y), y /= y), x /= x)
    end function
    real(4) function fmax44(x, y) result (res)
        real(4), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(y, merge(x, max(x, y), y /= y), x /= x)
    end function
    real(8) function fmax84(x, y) result(res)
        real(8), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(dble(y), merge(x, max(x, dble(y)), y /= y), x /= x)
    end function
    real(8) function fmax48(x, y) result(res)
        real(4), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(dble(x), max(dble(x), y), y /= y), x /= x)
    end function
    real(8) function fmin88(x, y) result (res)
        real(8), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(x, min(x, y), y /= y), x /= x)
    end function
    real(4) function fmin44(x, y) result (res)
        real(4), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(y, merge(x, min(x, y), y /= y), x /= x)
    end function
    real(8) function fmin84(x, y) result(res)
        real(8), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(dble(y), merge(x, min(x, dble(y)), y /= y), x /= x)
    end function
    real(8) function fmin48(x, y) result(res)
        real(4), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(dble(x), min(dble(x), y), y /= y), x /= x)
    end function
end module

real(8) function code(x, y, z)
use fmin_fmax_functions
    real(8), intent (in) :: x
    real(8), intent (in) :: y
    real(8), intent (in) :: z
    real(8) :: tmp
    if ((y <= (-1.2d+121)) .or. (.not. (y <= 1.15d+44))) then
        tmp = y * x
    else
        tmp = ((-1.0d0) + x) * z
    end if
    code = tmp
end function

Java

public static double code(double x, double y, double z) {
	double tmp;
	if ((y <= -1.2e+121) || !(y <= 1.15e+44)) {
		tmp = y * x;
	} else {
		tmp = (-1.0 + x) * z;
	}
	return tmp;
}

Python

def code(x, y, z):
	tmp = 0
	if (y <= -1.2e+121) or not (y <= 1.15e+44):
		tmp = y * x
	else:
		tmp = (-1.0 + x) * z
	return tmp

Julia

function code(x, y, z)
	tmp = 0.0
	if ((y <= -1.2e+121) || !(y <= 1.15e+44))
		tmp = Float64(y * x);
	else
		tmp = Float64(Float64(-1.0 + x) * z);
	end
	return tmp
end

MATLAB

function tmp_2 = code(x, y, z)
	tmp = 0.0;
	if ((y <= -1.2e+121) || ~((y <= 1.15e+44)))
		tmp = y * x;
	else
		tmp = (-1.0 + x) * z;
	end
	tmp_2 = tmp;
end

Wolfram

code[x_, y_, z_] := If[Or[LessEqual[y, -1.2e+121], N[Not[LessEqual[y, 1.15e+44]], $MachinePrecision]], N[(y * x), $MachinePrecision], N[(N[(-1.0 + x), $MachinePrecision] * z), $MachinePrecision]]

Derivation

1. Split input into 2 regimes

2. if y < -1.2e121 or 1.15000000000000002e44 < y

   1. Initial program 97.2%

      \[x \cdot y + \left(x - 1\right) \cdot z \]
   2. Add Preprocessing

   3. Taylor expanded in x around inf

      \[\leadsto \color{blue}{x \cdot \left(y + z\right)} \]
   4. Step-by-step derivation

      1. *-commutative N/A

         \[\leadsto \color{blue}{\left(y + z\right) \cdot x} \]

      2. lower-*.f64 N/A

         \[\leadsto \color{blue}{\left(y + z\right) \cdot x} \]

      3. +-commutative N/A

         \[\leadsto \color{blue}{\left(z + y\right)} \cdot x \]

      4. lower-+.f64 79.2

         \[\leadsto \color{blue}{\left(z + y\right)} \cdot x \]

   5. Applied rewrites 79.2%

      \[\leadsto \color{blue}{\left(z + y\right) \cdot x} \]
   6. Step-by-step derivation

   7. Applied rewrites 78.3%

      \[\leadsto \mathsf{fma}\left(z, \color{blue}{x}, y \cdot x\right) \]

   8. Taylor expanded in y around 0

      \[\leadsto x \cdot \color{blue}{z} \]
   9. Step-by-step derivation

   10. Applied rewrites 11.2%

       \[\leadsto x \cdot \color{blue}{z} \]

   11. Taylor expanded in y around inf

       \[\leadsto \color{blue}{x \cdot y} \]
   12. Step-by-step derivation

       1. *-commutative N/A

          \[\leadsto \color{blue}{y \cdot x} \]

       2. lower-*.f64 74.2

          \[\leadsto \color{blue}{y \cdot x} \]

   13. Applied rewrites 74.2%

       \[\leadsto \color{blue}{y \cdot x} \]

   if -1.2e121 < y < 1.15000000000000002e44

   1. Initial program 100.0%

      \[x \cdot y + \left(x - 1\right) \cdot z \]
   2. Add Preprocessing

   3. Taylor expanded in y around 0

      \[\leadsto \color{blue}{z \cdot \left(x - 1\right)} \]
   4. Step-by-step derivation

      1. distribute-rgt-out-- N/A

         \[\leadsto \color{blue}{x \cdot z - 1 \cdot z} \]

      2. metadata-eval N/A

         \[\leadsto x \cdot z - \color{blue}{\left(\mathsf{neg}\left(-1\right)\right)} \cdot z \]

      3. fp-cancel-sign-sub-inv N/A

         \[\leadsto \color{blue}{x \cdot z + -1 \cdot z} \]

      4. +-commutative N/A

         \[\leadsto \color{blue}{-1 \cdot z + x \cdot z} \]

      5. distribute-rgt-out N/A

         \[\leadsto \color{blue}{z \cdot \left(-1 + x\right)} \]

      6. *-commutative N/A

         \[\leadsto \color{blue}{\left(-1 + x\right) \cdot z} \]

      7. lower-*.f64 N/A

         \[\leadsto \color{blue}{\left(-1 + x\right) \cdot z} \]

      8. lower-+.f64 83.9

         \[\leadsto \color{blue}{\left(-1 + x\right)} \cdot z \]

   5. Applied rewrites 83.9%

      \[\leadsto \color{blue}{\left(-1 + x\right) \cdot z} \]
3. Recombined 2 regimes into one program.

4. Final simplification 79.9%

   \[\leadsto \begin{array}{l} \mathbf{if}\;y \leq -1.2 \cdot 10^{+121} \lor \neg \left(y \leq 1.15 \cdot 10^{+44}\right):\\ \;\;\;\;y \cdot x\\ \mathbf{else}:\\ \;\;\;\;\left(-1 + x\right) \cdot z\\ \end{array} \]
5. Add Preprocessing

Alternative 5: 83.9% accurate, 0.8× speedup

Math

\[\begin{array}{l} \\ \begin{array}{l} \mathbf{if}\;x \leq -1.15 \cdot 10^{-34}:\\ \;\;\;\;\mathsf{fma}\left(z, x, y \cdot x\right)\\ \mathbf{elif}\;x \leq 5.7 \cdot 10^{-8}:\\ \;\;\;\;\left(-1 + x\right) \cdot z\\ \mathbf{else}:\\ \;\;\;\;\left(z + y\right) \cdot x\\ \end{array} \end{array} \]

FPCore

(FPCore (x y z)
 :precision binary64
 (if (<= x -1.15e-34)
   (fma z x (* y x))
   (if (<= x 5.7e-8) (* (+ -1.0 x) z) (* (+ z y) x))))

C

double code(double x, double y, double z) {
	double tmp;
	if (x <= -1.15e-34) {
		tmp = fma(z, x, (y * x));
	} else if (x <= 5.7e-8) {
		tmp = (-1.0 + x) * z;
	} else {
		tmp = (z + y) * x;
	}
	return tmp;
}

Julia

function code(x, y, z)
	tmp = 0.0
	if (x <= -1.15e-34)
		tmp = fma(z, x, Float64(y * x));
	elseif (x <= 5.7e-8)
		tmp = Float64(Float64(-1.0 + x) * z);
	else
		tmp = Float64(Float64(z + y) * x);
	end
	return tmp
end

Wolfram

code[x_, y_, z_] := If[LessEqual[x, -1.15e-34], N[(z * x + N[(y * x), $MachinePrecision]), $MachinePrecision], If[LessEqual[x, 5.7e-8], N[(N[(-1.0 + x), $MachinePrecision] * z), $MachinePrecision], N[(N[(z + y), $MachinePrecision] * x), $MachinePrecision]]]

Derivation

1. Split input into 3 regimes

2. if x < -1.15000000000000006e-34

   1. Initial program 100.0%

      \[x \cdot y + \left(x - 1\right) \cdot z \]
   2. Add Preprocessing

   3. Taylor expanded in x around inf

      \[\leadsto \color{blue}{x \cdot \left(y + z\right)} \]
   4. Step-by-step derivation

      1. *-commutative N/A

         \[\leadsto \color{blue}{\left(y + z\right) \cdot x} \]

      2. lower-*.f64 N/A

         \[\leadsto \color{blue}{\left(y + z\right) \cdot x} \]

      3. +-commutative N/A

         \[\leadsto \color{blue}{\left(z + y\right)} \cdot x \]

      4. lower-+.f64 94.9

         \[\leadsto \color{blue}{\left(z + y\right)} \cdot x \]

   5. Applied rewrites 94.9%

      \[\leadsto \color{blue}{\left(z + y\right) \cdot x} \]
   6. Step-by-step derivation

   7. Applied rewrites 95.0%

      \[\leadsto \mathsf{fma}\left(z, \color{blue}{x}, y \cdot x\right) \]

   if -1.15000000000000006e-34 < x < 5.70000000000000009e-8

   1. Initial program 100.0%

      \[x \cdot y + \left(x - 1\right) \cdot z \]
   2. Add Preprocessing

   3. Taylor expanded in y around 0

      \[\leadsto \color{blue}{z \cdot \left(x - 1\right)} \]
   4. Step-by-step derivation

      1. distribute-rgt-out-- N/A

         \[\leadsto \color{blue}{x \cdot z - 1 \cdot z} \]

      2. metadata-eval N/A

         \[\leadsto x \cdot z - \color{blue}{\left(\mathsf{neg}\left(-1\right)\right)} \cdot z \]

      3. fp-cancel-sign-sub-inv N/A

         \[\leadsto \color{blue}{x \cdot z + -1 \cdot z} \]

      4. +-commutative N/A

         \[\leadsto \color{blue}{-1 \cdot z + x \cdot z} \]

      5. distribute-rgt-out N/A

         \[\leadsto \color{blue}{z \cdot \left(-1 + x\right)} \]

      6. *-commutative N/A

         \[\leadsto \color{blue}{\left(-1 + x\right) \cdot z} \]

      7. lower-*.f64 N/A

         \[\leadsto \color{blue}{\left(-1 + x\right) \cdot z} \]

      8. lower-+.f64 80.3

         \[\leadsto \color{blue}{\left(-1 + x\right)} \cdot z \]

   5. Applied rewrites 80.3%

      \[\leadsto \color{blue}{\left(-1 + x\right) \cdot z} \]

   if 5.70000000000000009e-8 < x

   1. Initial program 95.5%

      \[x \cdot y + \left(x - 1\right) \cdot z \]
   2. Add Preprocessing

   3. Taylor expanded in x around inf

      \[\leadsto \color{blue}{x \cdot \left(y + z\right)} \]
   4. Step-by-step derivation

      1. *-commutative N/A

         \[\leadsto \color{blue}{\left(y + z\right) \cdot x} \]

      2. lower-*.f64 N/A

         \[\leadsto \color{blue}{\left(y + z\right) \cdot x} \]

      3. +-commutative N/A

         \[\leadsto \color{blue}{\left(z + y\right)} \cdot x \]

      4. lower-+.f64 99.3

         \[\leadsto \color{blue}{\left(z + y\right)} \cdot x \]

   5. Applied rewrites 99.3%

      \[\leadsto \color{blue}{\left(z + y\right) \cdot x} \]
3. Recombined 3 regimes into one program.
4. Add Preprocessing

Alternative 6: 60.9% accurate, 0.9× speedup

Math

\[\begin{array}{l} \\ \begin{array}{l} \mathbf{if}\;x \leq -1 \lor \neg \left(x \leq 0.000195\right):\\ \;\;\;\;x \cdot z\\ \mathbf{else}:\\ \;\;\;\;-z\\ \end{array} \end{array} \]

FPCore

(FPCore (x y z)
 :precision binary64
 (if (or (<= x -1.0) (not (<= x 0.000195))) (* x z) (- z)))

C

double code(double x, double y, double z) {
	double tmp;
	if ((x <= -1.0) || !(x <= 0.000195)) {
		tmp = x * z;
	} else {
		tmp = -z;
	}
	return tmp;
}

Fortran

module fmin_fmax_functions
    implicit none
    private
    public fmax
    public fmin

    interface fmax
        module procedure fmax88
        module procedure fmax44
        module procedure fmax84
        module procedure fmax48
    end interface
    interface fmin
        module procedure fmin88
        module procedure fmin44
        module procedure fmin84
        module procedure fmin48
    end interface
contains
    real(8) function fmax88(x, y) result (res)
        real(8), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(x, max(x, y), y /= y), x /= x)
    end function
    real(4) function fmax44(x, y) result (res)
        real(4), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(y, merge(x, max(x, y), y /= y), x /= x)
    end function
    real(8) function fmax84(x, y) result(res)
        real(8), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(dble(y), merge(x, max(x, dble(y)), y /= y), x /= x)
    end function
    real(8) function fmax48(x, y) result(res)
        real(4), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(dble(x), max(dble(x), y), y /= y), x /= x)
    end function
    real(8) function fmin88(x, y) result (res)
        real(8), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(x, min(x, y), y /= y), x /= x)
    end function
    real(4) function fmin44(x, y) result (res)
        real(4), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(y, merge(x, min(x, y), y /= y), x /= x)
    end function
    real(8) function fmin84(x, y) result(res)
        real(8), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(dble(y), merge(x, min(x, dble(y)), y /= y), x /= x)
    end function
    real(8) function fmin48(x, y) result(res)
        real(4), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(dble(x), min(dble(x), y), y /= y), x /= x)
    end function
end module

real(8) function code(x, y, z)
use fmin_fmax_functions
    real(8), intent (in) :: x
    real(8), intent (in) :: y
    real(8), intent (in) :: z
    real(8) :: tmp
    if ((x <= (-1.0d0)) .or. (.not. (x <= 0.000195d0))) then
        tmp = x * z
    else
        tmp = -z
    end if
    code = tmp
end function

Java

public static double code(double x, double y, double z) {
	double tmp;
	if ((x <= -1.0) || !(x <= 0.000195)) {
		tmp = x * z;
	} else {
		tmp = -z;
	}
	return tmp;
}

Python

def code(x, y, z):
	tmp = 0
	if (x <= -1.0) or not (x <= 0.000195):
		tmp = x * z
	else:
		tmp = -z
	return tmp

Julia

function code(x, y, z)
	tmp = 0.0
	if ((x <= -1.0) || !(x <= 0.000195))
		tmp = Float64(x * z);
	else
		tmp = Float64(-z);
	end
	return tmp
end

MATLAB

function tmp_2 = code(x, y, z)
	tmp = 0.0;
	if ((x <= -1.0) || ~((x <= 0.000195)))
		tmp = x * z;
	else
		tmp = -z;
	end
	tmp_2 = tmp;
end

Wolfram

code[x_, y_, z_] := If[Or[LessEqual[x, -1.0], N[Not[LessEqual[x, 0.000195]], $MachinePrecision]], N[(x * z), $MachinePrecision], (-z)]

Derivation

1. Split input into 2 regimes

2. if x < -1 or 1.94999999999999996e-4 < x

   1. Initial program 97.5%

      \[x \cdot y + \left(x - 1\right) \cdot z \]
   2. Add Preprocessing

   3. Taylor expanded in x around inf

      \[\leadsto \color{blue}{x \cdot \left(y + z\right)} \]
   4. Step-by-step derivation

      1. *-commutative N/A

         \[\leadsto \color{blue}{\left(y + z\right) \cdot x} \]

      2. lower-*.f64 N/A

         \[\leadsto \color{blue}{\left(y + z\right) \cdot x} \]

      3. +-commutative N/A

         \[\leadsto \color{blue}{\left(z + y\right)} \cdot x \]

      4. lower-+.f64 99.1

         \[\leadsto \color{blue}{\left(z + y\right)} \cdot x \]

   5. Applied rewrites 99.1%

      \[\leadsto \color{blue}{\left(z + y\right) \cdot x} \]
   6. Step-by-step derivation

   7. Applied rewrites 98.3%

      \[\leadsto \mathsf{fma}\left(z, \color{blue}{x}, y \cdot x\right) \]

   8. Taylor expanded in y around 0

      \[\leadsto x \cdot \color{blue}{z} \]
   9. Step-by-step derivation

   10. Applied rewrites 45.7%

       \[\leadsto x \cdot \color{blue}{z} \]

   if -1 < x < 1.94999999999999996e-4

   1. Initial program 100.0%

      \[x \cdot y + \left(x - 1\right) \cdot z \]
   2. Add Preprocessing

   3. Taylor expanded in x around 0

      \[\leadsto \color{blue}{-1 \cdot z} \]
   4. Step-by-step derivation

      1. mul-1-neg N/A

         \[\leadsto \color{blue}{\mathsf{neg}\left(z\right)} \]

      2. lower-neg.f64 75.5

         \[\leadsto \color{blue}{-z} \]

   5. Applied rewrites 75.5%

      \[\leadsto \color{blue}{-z} \]
3. Recombined 2 regimes into one program.

4. Final simplification 61.4%

   \[\leadsto \begin{array}{l} \mathbf{if}\;x \leq -1 \lor \neg \left(x \leq 0.000195\right):\\ \;\;\;\;x \cdot z\\ \mathbf{else}:\\ \;\;\;\;-z\\ \end{array} \]
5. Add Preprocessing

Alternative 7: 36.6% accurate, 5.7× speedup

Math

\[\begin{array}{l} \\ -z \end{array} \]

FPCore

(FPCore (x y z) :precision binary64 (- z))

C

double code(double x, double y, double z) {
	return -z;
}

Fortran

module fmin_fmax_functions
    implicit none
    private
    public fmax
    public fmin

    interface fmax
        module procedure fmax88
        module procedure fmax44
        module procedure fmax84
        module procedure fmax48
    end interface
    interface fmin
        module procedure fmin88
        module procedure fmin44
        module procedure fmin84
        module procedure fmin48
    end interface
contains
    real(8) function fmax88(x, y) result (res)
        real(8), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(x, max(x, y), y /= y), x /= x)
    end function
    real(4) function fmax44(x, y) result (res)
        real(4), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(y, merge(x, max(x, y), y /= y), x /= x)
    end function
    real(8) function fmax84(x, y) result(res)
        real(8), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(dble(y), merge(x, max(x, dble(y)), y /= y), x /= x)
    end function
    real(8) function fmax48(x, y) result(res)
        real(4), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(dble(x), max(dble(x), y), y /= y), x /= x)
    end function
    real(8) function fmin88(x, y) result (res)
        real(8), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(x, min(x, y), y /= y), x /= x)
    end function
    real(4) function fmin44(x, y) result (res)
        real(4), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(y, merge(x, min(x, y), y /= y), x /= x)
    end function
    real(8) function fmin84(x, y) result(res)
        real(8), intent (in) :: x
        real(4), intent (in) :: y
        res = merge(dble(y), merge(x, min(x, dble(y)), y /= y), x /= x)
    end function
    real(8) function fmin48(x, y) result(res)
        real(4), intent (in) :: x
        real(8), intent (in) :: y
        res = merge(y, merge(dble(x), min(dble(x), y), y /= y), x /= x)
    end function
end module

real(8) function code(x, y, z)
use fmin_fmax_functions
    real(8), intent (in) :: x
    real(8), intent (in) :: y
    real(8), intent (in) :: z
    code = -z
end function

Java

public static double code(double x, double y, double z) {
	return -z;
}

Python

def code(x, y, z):
	return -z

Julia

function code(x, y, z)
	return Float64(-z)
end

MATLAB

function tmp = code(x, y, z)
	tmp = -z;
end

Wolfram

code[x_, y_, z_] := (-z)

Derivation

1. Initial program 98.8%

   \[x \cdot y + \left(x - 1\right) \cdot z \]
2. Add Preprocessing

3. Taylor expanded in x around 0

   \[\leadsto \color{blue}{-1 \cdot z} \]
4. Step-by-step derivation

   1. mul-1-neg N/A

      \[\leadsto \color{blue}{\mathsf{neg}\left(z\right)} \]

   2. lower-neg.f64 41.1

      \[\leadsto \color{blue}{-z} \]

5. Applied rewrites 41.1%

   \[\leadsto \color{blue}{-z} \]
6. Add Preprocessing

Reproduce

herbie shell --seed 2024364 
(FPCore (x y z)
  :name "Graphics.Rendering.Chart.Drawing:drawTextsR from Chart-1.5.3"
  :precision binary64
  (+ (* x y) (* (- x 1.0) z)))