UniformSampleCone, z

Percentage Accurate: 99.9% → 99.9%
Time: 3.9s
Alternatives: 1
Speedup: 1.0×

Specification

?
\[\left(\left(2.328306437 \cdot 10^{-10} \leq ux \land ux \leq 1\right) \land \left(2.328306437 \cdot 10^{-10} \leq uy \land uy \leq 1\right)\right) \land \left(0 \leq maxCos \land maxCos \leq 1\right)\]
\[\begin{array}{l} \\ \left(1 - ux\right) + ux \cdot maxCos \end{array} \]
(FPCore (ux uy maxCos) :precision binary32 (+ (- 1.0 ux) (* ux maxCos)))
float code(float ux, float uy, float maxCos) {
	return (1.0f - ux) + (ux * maxCos);
}

real(4) function code(ux, uy, maxcos)
    real(4), intent (in) :: ux
    real(4), intent (in) :: uy
    real(4), intent (in) :: maxcos
    code = (1.0e0 - ux) + (ux * maxcos)
end function

function code(ux, uy, maxCos)
	return Float32(Float32(Float32(1.0) - ux) + Float32(ux * maxCos))
end

function tmp = code(ux, uy, maxCos)
	tmp = (single(1.0) - ux) + (ux * maxCos);
end

\begin{array}{l}

\\
\left(1 - ux\right) + ux \cdot maxCos
\end{array}

Sampling outcomes in binary32 precision:

Local Percentage Accuracy vs ?

The average percentage accuracy by input value. Horizontal axis shows value of an input variable; the variable is choosen in the title. Vertical axis is accuracy; higher is better. Red represent the original program, while blue represents Herbie's suggestion. These can be toggled with buttons below the plot. The line is an average while dots represent individual samples.

Accuracy vs Speed?

Herbie found 1 alternatives:

AlternativeAccuracySpeedup
The accuracy (vertical axis) and speed (horizontal axis) of each alternatives. Up and to the right is better. The red square shows the initial program, and each blue circle shows an alternative.The line shows the best available speed-accuracy tradeoffs.

Initial Program: 99.9% accurate, 1.0× speedup?

\[\begin{array}{l} \\ \left(1 - ux\right) + ux \cdot maxCos \end{array} \]
(FPCore (ux uy maxCos) :precision binary32 (+ (- 1.0 ux) (* ux maxCos)))
float code(float ux, float uy, float maxCos) {
	return (1.0f - ux) + (ux * maxCos);
}

real(4) function code(ux, uy, maxcos)
    real(4), intent (in) :: ux
    real(4), intent (in) :: uy
    real(4), intent (in) :: maxcos
    code = (1.0e0 - ux) + (ux * maxcos)
end function

function code(ux, uy, maxCos)
	return Float32(Float32(Float32(1.0) - ux) + Float32(ux * maxCos))
end

function tmp = code(ux, uy, maxCos)
	tmp = (single(1.0) - ux) + (ux * maxCos);
end

\begin{array}{l}

\\
\left(1 - ux\right) + ux \cdot maxCos
\end{array}

Alternative 1: 99.9% accurate, 1.0× speedup?

\[\begin{array}{l} \\ \left(1 - ux\right) + ux \cdot maxCos \end{array} \]
(FPCore (ux uy maxCos) :precision binary32 (+ (- 1.0 ux) (* ux maxCos)))
float code(float ux, float uy, float maxCos) {
	return (1.0f - ux) + (ux * maxCos);
}

real(4) function code(ux, uy, maxcos)
    real(4), intent (in) :: ux
    real(4), intent (in) :: uy
    real(4), intent (in) :: maxcos
    code = (1.0e0 - ux) + (ux * maxcos)
end function

function code(ux, uy, maxCos)
	return Float32(Float32(Float32(1.0) - ux) + Float32(ux * maxCos))
end

function tmp = code(ux, uy, maxCos)
	tmp = (single(1.0) - ux) + (ux * maxCos);
end

\begin{array}{l}

\\
\left(1 - ux\right) + ux \cdot maxCos
\end{array}
Derivation

  1. Initial program 100.0%

    \[\left(1 - ux\right) + ux \cdot maxCos \]
  2. Add Preprocessing

  3. Final simplification100.0%

    \[\leadsto \left(1 - ux\right) + ux \cdot maxCos \]
  4. Add Preprocessing

Reproduce

?
herbie shell --seed 2024039 
(FPCore (ux uy maxCos)
  :name "UniformSampleCone, z"
  :precision binary32
  :pre (and (and (and (<= 2.328306437e-10 ux) (<= ux 1.0)) (and (<= 2.328306437e-10 uy) (<= uy 1.0))) (and (<= 0.0 maxCos) (<= maxCos 1.0)))
  (+ (- 1.0 ux) (* ux maxCos)))